answersLogoWhite

0

The contraction of LNG pipeline which carries a condensed gas ,which caused by low temperature during operation, may impact the structure of pipeline, It is necessary to use compensation structure in the LNG pipeline to deal with the contraction of pipeline. This paper use bent pipe to compensate the amount of contraction of subsea LNG cryogenic pipeline. At the bends, the gas expands and thus maintain a constant volume while being carried from onshore to the processing plant.

Source: cedb.asce

User Avatar

Wiki User

9y ago

What else can I help you with?

Related Questions

What were the important curved structures in the aqueduct?

Internally, they were the pipes, either made of ceramic or lead; externally they were the arches that supported an overland aqueduct.


When was Golar LNG created?

Golar LNG was created in 2001.


What is the population of Golar LNG?

Golar LNG's population is 2,010.


What is Golar LNG's population?

The population of Golar LNG is 33.


How do you make wider chain link gate?

Not enough information - If it's made with separate corner pieces and pipes, you can get longer pipes the same size and a longer section of the chain link mesh. Take it apart, replace the pipes and mesh, and reassemble. If the pipes are curved around the corners, the best way is just buy a new gate.


Can a car run on lng?

LNG can be used in diesel engines. UPS is using Kenworth manufactured trucks that use primarily LNG for their long haul routes. LNG is cryogenics and requires special storage and handling.


When was Dapeng LNG terminal created?

Dapeng LNG terminal was created in 2004.


LPG vs LNG?

LPG contains propane and butane LNG contains methane


What is the symbol for Golar LNG Limited in NASDAQ?

The symbol for Golar LNG Limited in NASDAQ is: GLNG.


How do you you convert LNG (liquefied natural gas) gallons into therms?

To convert LNG gallons to therms, you need to know the energy content of LNG. LNG has an energy content of about 0.0374 therms per gallon. Therefore, to convert LNG gallons to therms, you would multiply the number of gallons by 0.0374. This calculation will give you the equivalent amount of energy in therms.


How many mmbtu in 1kg of lng?

There are approximately 3.9 mmBTU in 1 kg of LNG (liquefied natural gas). This value can vary slightly depending on the specific composition of the LNG.


How many metric tons are in 30000 gallons of LNG?

Approximately 12.7 metric tons of LNG are in 30,000 gallons. This value can vary slightly depending on the specific composition and density of the LNG.