answersLogoWhite

0

The wrong one won't engage the whole screw head, which increases the risk of stripping out the star pattern when you try to tighten/undo the screw. And w/o the star pattern, tightening or removing the screw becomes quite hard.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

Where is the engine size marked on the engine?

normal on the front face of the engine or the right hand side of the engine


Calculate wrench size?

To calculate wrench size you measure across the flat surfaces of the nut or bolt, then pick a wrench marked with that size. Be careful, there are metric and SAE nuts and bolts and some wrenches are close but not right. -For instance you should not use a 1/2" wrench on a 12 mm nut. -It may look right, but will round the edges of the nut.


Difference between basic size and nominal size of an assembly?

on the basis of nominal diameter with tolerances is called nominal size, while required size is called basic size


Grain structure of gray cast iron?

The grain structure of gray cast iron falls into 4 main classifications, or types. The most desirable of the four is called Type 'A' wherein the carbon is solidified into flake like crystals, in a random distribution. The size is also classified, in sizes ranging from Size 2 to 7. The best grain structure for general service castings is Type 'A', Size 3 to 5. The smaller the size number indicates the longest flake length, and the excessively long flakes in Size 2 will render the iron somewhat weaker, so the most desirable size is a mixture of 3, 4 and 5. Some applications may call for Type 4, but generally the other Types are undesirable and are the result of defective chemistry or a process defect.


what size of cylinder is to use in hydraulic press?

The size of the cylinder to use in a hydraulic press depends on the intended application, the required force output, and the available hydraulic pressure. Generally, larger cylinders generate more force but require a higher input fluid volume. It's essential to calculate the force needed based on the material being pressed and the pressure available from the hydraulic system, typically measured in pounds per square inch (PSI). Selecting the right size ensures efficiency and safety in operation.

Related Questions

Why is it best to use the right size of Philip screwdriver?

it is best to use the right size of philip screwdriver because this will prevent the screw to be from loosen its thread.


What size screwdriver do you need to open up a MacBook Pro late 2011?

#00 Philips screwdriver


What size screwdriver do you need to open the Nerf Longshot?

A Miedium size Philips screw driver


What are the best tips for choosing the right Philips drill bit for a specific project?

When choosing the right Philips drill bit for a project, consider the size and type of screw you will be using. Match the size and type of the screw head to the corresponding Philips bit size. Additionally, consider the material you will be drilling into and choose a bit that is suitable for that material. Make sure the bit is compatible with your drill and always use the correct size and type of bit for the best results.


Why is it best to use the right size of Philips-type screwdriver?

The wrong one won't engage the whole screw head, which increases the risk of stripping out the star pattern when you try to tighten/undo the screw. And w/o the star pattern, tightening or removing the screw becomes quite hard.


How can I choose the best screwdriver for a screw with a tapered head?

To choose the best screwdriver for a screw with a tapered head, look for a screwdriver that matches the size and shape of the screw head. A screwdriver with a tapered tip or a flathead screwdriver may work best for this type of screw. Make sure the screwdriver fits securely in the screw head to avoid stripping or damaging the screw.


Where to get a screwdriver that will work on a dsi?

Hi, you could shop around for a tri-wing screwdriver, many people sell one that's the right size for use on nintendo products.


What information can I find in the Phillips screwdriver size chart?

In a Phillips screwdriver size chart, you can find information about the different sizes of Phillips screwdrivers and the corresponding screw sizes they are designed to fit. This chart helps you choose the right screwdriver for a specific screw, ensuring a proper fit and preventing damage to the screw or the tool.


Is a screw easy to use?

Depends on what head it has, a philips (cross-head) is easier to use than a straight edge head. As long as the screw driver, or drill bit your using is the right size, they aren't bad either way you go (philips or straight) the philips are just easier to keep drivers in.


What size screen does the Philips PET7402/37 offer?

The Philips model PET7402/37 features a 7" Lcd screen for viewing.


What is the best technique for using a push screwdriver effectively?

The best technique for using a push screwdriver effectively is to apply steady pressure while turning the handle in a clockwise direction. Make sure the screwdriver tip is properly aligned with the screw head to avoid stripping the screw. Additionally, use the appropriate size and type of screwdriver for the job to ensure a secure and efficient fastening.


What is number 2 screwdriver?

Believe it or not screwdrivers come in sizes. Number 2 is the size of the screwdriver.