The Jeep Liberty shifts to four-wheel drive (4WD) using a transfer case lever or switch, depending on the model year. For models with a manual lever, the driver typically needs to come to a complete stop, shift the transmission to neutral, and then move the lever to the desired 4WD setting. In models with an electronic switch, the driver can engage 4WD while in gear, but it's advisable to follow the manufacturer's guidelines for optimal performance. Always ensure the vehicle is at a low speed when shifting into 4WD to prevent damage.
Shift the 4 wheel drive lever into 4 wheel drive.
2002 jeep liberty limited four wheel drive is stuck in 4 low how do I get it unstuck?
No... The Liberty is by default a rear wheel drive SUV with the option of connect the front axle to change to a 4WD mode.
no, the transfer case must be installed in the jeep in order to drive it
According to the 2006 Jeep Liberty Owners manual a two wheel drive Liberty CANNOT BE TOWED!
Put the lever into the 4wd position.
No, there was an 2wd option.
Sure, just don't shift it into 4 wheel drive...
That is 4 wheel drive. You are allowed to drive in that range on slippery surfaces.
You pull the transfer case level towards you....
Shift to 4-wheel drive on the go and let off accelerator for a few seconds and go back on the accelerator and it will shift in about 5-10 seconds ..
You pull the transfer case shifter from 2wd to 4wd.