answersLogoWhite

0

Check with the maker- there are different models and accesories. Manufacturer:SNUGTOPLocation:1711 Harbor Avenue P.O. Box 121Long Beach, CA 90801 USAPhone:(562)432-5454

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What profession was Goose thinking about after Top Gun?

Truck Driver


What is the coil on the top of the distributor cap on 1979 Chevy truck?

That is the ignition coil.


Where is the ignition coil on a 1976 Chevy truck?

The coil is attached to the top of the distributor cap.


Do you place a gasket or a caulk between the cap and truck body to keep from leaking?

I put foam tape between a camper top and the truck bed.


How do you adjust the king pins on a gmc top kick?

They use shims under the cap that's on the top. You can get them from a GM truck dealer or from an alignment shop.


Where is radiator cap for Chevy truck?

Pop the hood it's gonna be on either the top left or top right of the radiator. right behind the grill.


How do you put water in the banzai twin force water gun?

To fill the Banzai Twin Force water gun, locate the fill cap, usually on the top or bottom of the gun. Open the cap and carefully pour water into the reservoir using a hose, sink, or bucket until it's full. Close the cap securely before use.


How much does a regular size Table top truck weigh?

tabletop truck weight depends on size of truck


Where do you add engine oil to a 82 Ford F150?

I have the same truck. Driver side of the engine, on top of the valve cover there's a cap with a hose coming out. Unscrew cap and add oil there.


Where do you add oil in a 79 Chevy pickup truck?

There should be a cap on the top of 1 valve cover are the other that you remove to add oil.


On GM truck air conditioning compressor what is the cap looks like a freeze plug on top of the compressor mine is blowing the refrigerant out?

That refrigerant oil


How do you use a cap gun?

It is simple really as you pull the trigger a sping pushes the hammer back ad pushes your cap up or your cap round depending on what caps you get then when the spring gets tight it reallises and the hammer bursts the ca to make the spark and bang.