0
What else can I help you with?
Who made belt?
their bosses over time
How do you fit fan belt on Mercedes vito?
The fan belt is fit onto a Mercedes Vito by loosening the alternator bracket and allowing it to move downward. The belt can then be slipped over the remaining pulleys and then back over the alternator.
Why a wide steel belt is provided over wheels of an army tank?
To increse the surface area of the part of the tank in contact with the ground so that pressure due heavy load due to tank do not make it sink and lets it move faster.
Why wide steel belt is provided over the wheels of an army truck?
A wide steel belt is provided over the wheels of an army truck to enhance traction and distribute the vehicle's weight more evenly over soft or uneven terrain, such as mud, sand, or snow. This design minimizes the risk of the truck sinking or getting stuck, allowing for better mobility in challenging environments. Additionally, the steel belt improves durability and resistance to wear, ensuring the vehicle can withstand harsh conditions during military operations.
What are facts about steel?
Some facts about steel is that more steel is recycled in the United States than paper and steel can be recycled over and over without any loss in strength. Another fact about steel is that steel is made from iron and a small amount of carbon.
How do you get this serpentine belt back on 2002 VW GTI 1.8L turbo?
You should have a belt path diagram, with AC or without. Move the tensioner forward and insert a steel pin or drill bit about 3/16 into the 2 holes. (14 mm) The belt goes 180 degrees over the engine pulley, 170 degrees over the next pulley, behind the compressor pulley 80 degrees, and over the alternator pulley 180 degrees. The tensioner pushes down and forward on the belt between the alternator and engine pulley. jC
How as the umbrella changed over time?
it was made by steel and someone fell on it
How is steel wire made?
Steel wire is made by stretching out a molten lob of steel and cooling it really quick while it is still in its elongated state. The wires can then be twisted over each other to make thicker steel ropes.
How many tons of steel was the Titanic made out of?
All of Titanic was over 46,000 tons. Probably most of that would have been the steel.
What are the metals in steel?
Steel is made of iron to which is added between 0,02 % and 1.67 % of carbon.If you go over 2% of carbon, you'll get cast iron instead of steel.
How do you get your serpentine belt over your tensioner g20 van?
Use a breaker bar or rachet to move tensioner out of the way
Why a wide steel belt is provided over the wheels of an army tank?
since p=thrust/area,if a wide steel belt(more area) is provided ,it reduces the pressure exerted by the tank on the ground.so,it prevents the tank from sinking into the ground. You may mean the actual tracks. They are engineered of many steel links, often rubber covered to enable the tank to run on many surfaces.
