answersLogoWhite

0

I used a 4 caster funiture dolly as a base for my 5500. The gen fits perfectly on it.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What size breaker is needed to connect 5500 watt gas powered generator?

A 5500 watt gas powered generator typically requires a 30 amp breaker for a 240 volt connection. It is recommended to consult the manufacturer's specifications to ensure the correct breaker size for your specific generator model.


What are the torque specs for a flywheel and clutch on a 5500 john deere tractor?

what are the torque specs for clutch and fly wheel model 5700


What is the oil capacity for a John Deere 5500 generator?

The oil capacity for a John Deere 5500 generator is typically around 2.5 quarts (approximately 2.4 liters). However, it's essential to consult the operator's manual for your specific model, as capacities can vary slightly. Always ensure to check the oil level regularly and use the recommended oil type for optimal performance.


What is correct extension cord amp load for a 5500 volt generator?

For a 5500-watt generator, you should use an extension cord rated for at least 20 amps to safely handle the electrical load. Make sure the extension cord is in good condition and of the appropriate gauge to prevent overheating and ensure safe operation.


What is the oil capacity for onan 5500 generator?

The Onan 5500 generator typically has an oil capacity of about 1.5 quarts (or approximately 1.4 liters). It's important to use the recommended oil type as specified in the owner's manual for optimal performance. Always check the oil level before operation and change it according to the maintenance schedule to ensure the longevity of the generator.


Can you run a 240 volt welder with a 5500 watt generator 3 prong plug?

Yes, you can run a 240-volt welder with a 5500-watt generator, provided the welder's amperage draw does not exceed the generator's capacity. Most 240-volt welders require significant power, so you'll need to check the welder's specifications to ensure compatibility. Additionally, ensure that the generator has the appropriate 240-volt outlet and that the welder's plug matches the generator's outlet. If the welder's demand exceeds the generator's output, you may risk overloading the generator.


What IT corporation produces the color laser jet 5500 model?

Hewlett-Packard produces the color laser jet 5500 model. The service manual for this model is found easily online. Hewlett-Packard also offers technical support for this model.


What does napa 1374 oil filter fit?

onan marquis 5500 generator


How many amps does a 5500 watt generator uses?

A 5500 watt generator uses approximately 45.8 amps when running at full capacity (Watts = Amps x Volts, so 5500W = 45.8A x 120V). Keep in mind that the actual amperage may vary slightly depending on the voltage of the system.


What is one percent of 5500?

one percent of 5500 = 551% of 5500= 1% * 5500= 0.01 * 5500= 55


Will a 5500 watt generator run a electric water heater?

The average size water tank is 4500 watts. The generator's supply will be large enough to operate the water tank. Larger tanks over 5000 watts will not heat correctly.


What is 24 percent of 5500?

24% of 5500= 24% * 5500= 0.24 * 5500= 1,320