The average size water tank is 4500 watts. The generator's supply will be large enough to operate the water tank. Larger tanks over 5000 watts will not heat correctly.
A 5500 watt gas powered generator typically requires a 30 amp breaker for a 240 volt connection. It is recommended to consult the manufacturer's specifications to ensure the correct breaker size for your specific generator model.
To produce 5500 watts of instantaneous solar power you need roughly 120 sqyare metres of photvoltaic cells (11 metres x 11 metres). The 5500 watts is not used all the time though so it depends entirely on how much hot water you use. If you have it on all the time, you would need such an area. If you only have it running an hour a day you would need only a tenth of that but some way to store the energy you collect when the water isn't being heated up. It is much easier and cheaper to simply heat water directly from the sun using a solar water heater than to produce electricity to do it.
To determine the appropriate breaker size for a 5500-watt, 240-volt hot water heater, first calculate the current using the formula: Current (Amps) = Power (Watts) / Voltage (Volts). For a 5500-watt heater at 240 volts, the current is approximately 22.9 amps. It's recommended to use a breaker rated for 125% of the continuous load, so a 30-amp double-pole breaker is typically required for safe operation.
For a 5500-watt generator, you should use an extension cord rated for at least 20 amps to safely handle the electrical load. Make sure the extension cord is in good condition and of the appropriate gauge to prevent overheating and ensure safe operation.
A 5500 watt generator uses approximately 45.8 amps when running at full capacity (Watts = Amps x Volts, so 5500W = 45.8A x 120V). Keep in mind that the actual amperage may vary slightly depending on the voltage of the system.
The recommended water heater wattage for efficient heating in a residential setting is typically between 4500 to 5500 watts.
Current (Amps) = Power (Watt)/Voltage (V) Therefore a 4500W heating element will draw 18.75A = 4500W/240V
A 5500 watt gas powered generator typically requires a 30 amp breaker for a 240 volt connection. It is recommended to consult the manufacturer's specifications to ensure the correct breaker size for your specific generator model.
To produce 5500 watts of instantaneous solar power you need roughly 120 sqyare metres of photvoltaic cells (11 metres x 11 metres). The 5500 watts is not used all the time though so it depends entirely on how much hot water you use. If you have it on all the time, you would need such an area. If you only have it running an hour a day you would need only a tenth of that but some way to store the energy you collect when the water isn't being heated up. It is much easier and cheaper to simply heat water directly from the sun using a solar water heater than to produce electricity to do it.
I used a 4 caster funiture dolly as a base for my 5500. The gen fits perfectly on it.
For a 5500-watt generator, you should use an extension cord rated for at least 20 amps to safely handle the electrical load. Make sure the extension cord is in good condition and of the appropriate gauge to prevent overheating and ensure safe operation.
The Onan 5500 generator typically has an oil capacity of about 1.5 quarts (or approximately 1.4 liters). It's important to use the recommended oil type as specified in the owner's manual for optimal performance. Always check the oil level before operation and change it according to the maintenance schedule to ensure the longevity of the generator.
onan marquis 5500 generator
A 5500 watt generator uses approximately 45.8 amps when running at full capacity (Watts = Amps x Volts, so 5500W = 45.8A x 120V). Keep in mind that the actual amperage may vary slightly depending on the voltage of the system.
The key features and specifications of the 6500 watt Predator generator include a 420cc engine, electric start, 6500 watts of peak power and 5500 watts of continuous power output, a run time of up to 14.5 hours at 50 load, and multiple outlets for different power needs.
The GE water heater SE50M12AA01 is a 5500 watts or 5.5 Kilowatts water tank. The amperage on such a tank is I = W/E. Amps = Watts/Volts. Since most hot water tanks in North America use a voltage of 240, the amps will be 22.9 amps. It must be fed with a #10 conductor from a 30 amp breaker.
To find the net electric charge, we need to calculate the vector sum of the charges. In this case, we need to add the charges that are directed downwards (5500) and to the right (2200). Since charge is a scalar quantity, the net electric charge would simply be the algebraic sum of the two charges: 5500 down - 2200 right = 3300 down. So, the net electric charge is 3300 downwards.