0
an electrician told me to try soap, like a bar of dial soap. I use the little soaps you get from hotels because they are small and free.
Dont put anything that is conductive because you can really screw things up if it drips. Just rub soap around and it will help it screw in and out without causing problems.
What else can I help you with?
What simple machines makes up the base of a light-bulb?
The bottom of a light bulb is a screw.
What simple machines make up the base of a light bulb?
The simple machine that makes up the base of a light-bulb is just a screw. That screw allows you to insert the light-bulb into the base of a lamp. You must make sure to get the grooves of the screw lined up to properly tighten the bulb into place.
Did the light bulb make our lives easier?
yes
How did Thomas Edison make life easier?
Light bulb
How do you wire a light bulb holder properly?
To wire a light bulb holder properly, first turn off the power source. Connect the black wire to the brass screw terminal and the white wire to the silver screw terminal. Make sure the wires are securely fastened and the connections are tight. Finally, screw in the light bulb and turn the power back on to test the light.
What can you put on the bottom of a light bulb to make it easier to remove from the socket?
A light coating of silicone lubricant, available as a spray, on the bulb threads, will lubricate the bulb and socket, and be electrically safe, and will make future removal much easier. Only a LIGHT coating, or short spurt of silicone, wiped over the bulb base, should be used.
How do you change a light bulb?
To change a light bulb, first make sure the power is off. Unscrew the old bulb by turning it counterclockwise. Then, screw in the new bulb by turning it clockwise until it is secure. Turn the power back on to test the new bulb.
How do you change a light bulb?
You simply turn off the light switch ( so you don't get zapped). Wait a minute or so for the bulb to cool, then unscrew the burnt out light and reinsert a working light bulb. Be sure to tighten the bulb (so that it makes good contact with the base) , but don't force it or over-tighten.Turn the light off 1st to make sure you don't electrocute yourself, make sure to test the light after that.Put it in and screw it clockwise. Yes, simple.In a clockwise direction, until you can't screw anymore.Caution: If you screw it in too much or too hard, it might break.
How many dwarves does it take to change a light bulb?
5, one to screw it in and four to make a tower for the one with the lightbulb.
How do you change the light bulb in an oven?
To change the light bulb in an oven, first make sure the oven is turned off and cool. Locate the light bulb cover inside the oven and remove it. Unscrew the old light bulb and replace it with a new one of the same type. Screw the new bulb in place and put the cover back on. Turn the oven back on to test the new light bulb.
How many jacobs does it take to change a light bulb?
1000 1 to screw in the lightbulb 999 make sure he doesn't get shocked.
Is it okay to use Vaseline on a light bulb to make it easier to put in and get out?
Dielectric grease would be a better choice.
