To turn off the alarm on the Skyscan clock model 86715, press the "Alarm" button until you see the alarm icon disappear from the display. Alternatively, you can also press the "Snooze/Light" button to temporarily silence the alarm. For a more permanent solution, make sure to adjust the alarm settings to the off position. Always consult the user manual for specific instructions related to your model.
The SkyScan Atomic Clock model 86715 receives radio signals from atomic clocks to stay accurate. It automatically adjusts for Daylight Saving Time and has a large display for easy reading. It also features an alarm with snooze function.
To set the time on the Skyscan atomic clock model 86715, first, ensure the clock is plugged in and powered on. Press the "SET" button, then use the "HOUR" and "MINUTE" buttons to adjust the time. After setting the correct time, press "SET" again to confirm the changes. The clock should then display the updated time.
To turn off the alarm on the model 31269 Skyscan atomic clock, press the "ALARM" button until you see the alarm icon disappear from the display. If your clock has a snooze function, pressing the "SNOOZE" button will silence the alarm temporarily, but you'll need to deactivate the alarm entirely by using the "ALARM" button. Make sure to check the manual for any specific instructions related to your model.
To turn off the alarm on the Skyscan atomic clock model 38229-1, press the "ALARM" button until you see the alarm time flash on the display. Then, press the "SET" button to deactivate the alarm. You should see the alarm icon disappear, indicating that the alarm is off. Be sure to check the owner's manual for specific instructions related to your model.
To set the alarm on the SkyScan Atomic Clock model 38229-1, first, press the "ALARM" button to enter the alarm setting mode. Use the "HOUR" and "MIN" buttons to adjust the desired alarm time. Once set, press the "ALARM" button again to confirm and exit the setting mode. Ensure the alarm is activated by checking that the alarm icon is displayed on the screen.
Well, honey, first things first - find the manual. Then, set the time zone, date, and time using the buttons on the clock. Make sure to place the clock in an area with good reception for the atomic signal. And voila, you've got yourself a perfectly synced atomic clock. Now go out there and conquer the world, one precise second at a time!
How do you set the time on a S10/Scan atomic clock model 86715
To activate the Snooze Light on the SkyScan Clock Model 31981B, press the "Snooze" button, usually located on the top or front of the clock. This will temporarily silence the alarm and illuminate the display for a short period. If the light does not come on, check if the clock is plugged in properly and ensure the display settings are configured correctly. Refer to the user manual for additional troubleshooting steps if needed.
To turn off the alarm on the SkyScan model 38229-1, locate the "Alarm" button on the device. Press this button to deactivate the alarm sound. If the alarm is still sounding, you may also need to press the "Snooze" or "Off" button, depending on the model's specific features. For complete instructions, refer to the user manual.
http://skyscaninfo.com/content/manuals/33-model-31310t.html
Skyscan model 87315 does not have a manual on the Skyscan website. Use the manual for model 87310 and skip over the temperature transmitter instructions. The instructions for the setup buttons on the back work for 87315. I received the following in an email from the SkyScan website customer service. The clock referenced has a different frame, but the same functions and displays. You can use the manual for model 86730 this is the upgrade from your model and the functions are the same.
All house clocks with internal temperature gauges are automatically set to the temperature within the area. These gauges only tell what temperature the room is, not change the temperature, like a thermostat.