Properly installed, the lifetime of stucco is a very long time... BUT, the key being ~when properly installed, and over what substrate the stucco is applied.
In wood frame construction, more often than not, an insulative product such as metal skinned foam board is applied over an OSB (oriented strand board), or exterior grade plywood sheathing. An expanded metal lath (which cost about 50 cents per square foot) is the industry standard; however, 1" net wire (poultry Fencing) has been used for decades with quality results, and is economically more desirable ~the efficacy being subject to debate, but either way, the metal within provides the strength of the stucco wall, as concrete has very low inherent strength, is key to the products end quality ~it is only as strong as the re-enforcement within it, and the requirement of said reinforcement being properly attached to an approved substrate material cannot be overstated.
With proper installation, and annual 'patch the cracks'(the nature of life with stucco), the lifetime of the stucco coating will easily exceed 50 years; and if applied to a solid wall (concrete block/poured concrete/tilt-wall/adobe brick) ~the lifetime will likely exceed the time the building is allowed to stand.
Stucco does not require a sealant. You may consider doing a sealant if you are doing stucco concrete to protect from the weather.
Yes, as long as you prep the walls according to the stucco instructions.
The best stucco crack filler for repairing cracks in a stucco wall is a high-quality acrylic caulk or a stucco patching compound specifically designed for stucco repair. These products are durable, flexible, and easy to apply, providing a long-lasting solution for repairing stucco cracks.
For stucco application, you should use materials such as Portland cement, sand, and water. These are the basic ingredients needed to create a stucco mixture that can be applied to surfaces like walls or ceilings. Additionally, you may also need wire mesh or lath to provide a stable base for the stucco to adhere to.
Stucco siding works well as insulation in the winter months if the climate is dry and cold. Stucco siding also is fine in cold, windy weather as long as there isn't excessive moisture.
The best screws for stucco installation are corrosion-resistant screws made of stainless steel or coated with a material like zinc. These screws should be designed for use with stucco and have a sharp point for easy penetration. It is important to choose screws that are the right length and diameter for the job to ensure a secure and long-lasting installation.
Stucco always cracks. There is no guarantee that it won't. What is able to be done about it is dependent upon if the cracks are large or hairline.
Stucco typically takes about 48 hours to dry completely, but it can take up to 28 days to cure fully.
Yes, it is possible to put siding over stucco on a house. However, it is important to ensure that the stucco surface is in good condition and properly prepared before installing the siding to ensure a secure and long-lasting finish.
Stucco finishes for exterior surfaces offer benefits such as durability, low maintenance, fire resistance, and versatility in design. Stucco can also help regulate temperature and provide a long-lasting, attractive finish for buildings.
acrylic stucco should go for around $8/$10.dollors per sq ft.
Antarctica should last as long as the earth lasts.