0
What else can I help you with?
How much mortar do I need for my upcoming project?
To determine how much mortar you need for your project, calculate the area to be covered and the thickness of the mortar layer. Multiply the area by the thickness to find the volume of mortar needed.
How many 900mmx600mm slabs do you need for area 176m2?
If most of the off-cuts are also used then you will need 315 slabs. Otherwise you will need a lot more.
How many block paving slabs do are need for eight square meters?
Depends on the linear dimensions of both the slabs and the ground.
How much sand and cement will you need to lay 67 2x2 slabs?
To lay 67 2x2 slabs, you typically need a mix of sand and cement for the mortar or concrete. For a standard slab, you might use a 1:3 ratio of cement to sand. Assuming each slab requires around 0.1 cubic meters of concrete, you would need approximately 6.7 cubic meters of concrete total. This translates to about 1.67 cubic meters of cement and 5 cubic meters of sand, though actual requirements can vary based on specific project details and mix ratios.
How many 450mm x 450mm garden slabs do you need for garden area of 21ft x 19ft?
The answer will vary slightly depending on assumptions: will the slabs have a space between them, and will you be cutting the slabs to fill fractions. 21 feet is equal to 14.2 of the 450 mm slabs. 19 feet is equal to 12.9 of the slabs. To complete the rectangular area, 14.2 x 12.9 = 183 slabs.
How many 400mmx400mm slabs will you need to cover 6ftx4ft?
14
How many patio slabs 44 cm by 44 cm would be need for area 10 feet by 13 feet?
You will need 63 44cm x 44cm slabs to cover that area.
How much mortar do you remove for tuck pointing?
Generally speaking, masonry joints are typically ground out to at least a depth of 3/4". If your mortar is unuaually soft or loose you may need to go deeper.
Paving slabs used are all 1 foot square Customers tell Joe the dimensions of the pond and he has to work out how many paving slabs they need How many slabs are needed to surround 115 ft by 115 by ft?
Joe needs 460 paving slabs to surrond the pond.
How many slabs would you need for a sq meter if flags are 600mm x 600mm?
To determine how many slabs are needed for one square meter, first convert the dimensions of the slabs from millimeters to meters. A 600mm x 600mm slab is 0.6m x 0.6m, which has an area of 0.36 square meters. Therefore, to cover one square meter, you would need approximately 2.78 slabs. Since you can't have a fraction of a slab, you would need 3 slabs to cover one square meter.
How much mortar mix do you need?
Mix water with the mortar mix until it is a paste-like consistency. Then dip some of the mortar mix out with a hand trowel and turn the trowel upside down. If the mortar clings to the trowel blade, the mixture is perfect.
How much mortar per block?
For every block, you will use approximately 1.2 pounds of mortar
