0
What else can I help you with?
What do you call a large sprocket?
a large sprocket
When your in low gear what sprocket are you using?
It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.
What is the process for bike sprocket replacement?
To replace a bike sprocket, you will need to first remove the chain from the sprocket. Then, use a wrench to loosen the bolts holding the sprocket in place. Once the bolts are removed, take off the old sprocket and replace it with the new one. Secure the new sprocket in place by tightening the bolts. Finally, reattach the chain to the new sprocket.
What is the difference between sprocket and chain wheel?
Sprocket and chain and what?
What is the top speed of Honda 400ex with aftermarket rear sprocket?
depends if the sprocket is bigger or smaller than a stock sprocket.
What is the best way to remove a sprocket using a sprocket removal tool?
To remove a sprocket using a sprocket removal tool, first, place the tool over the sprocket and ensure it is securely in place. Then, use a wrench to turn the tool in a counterclockwise direction to loosen and remove the sprocket. Be sure to follow the manufacturer's instructions for the specific tool you are using to avoid damaging the sprocket or tool.
Is it roofs or rooves?
Roofs
What are the three main types of roofs?
The three main types of roofs are flat roofs, pitched roofs, and mansard roofs. Flat roofs have a slight pitch for water drainage, pitched roofs have a steep slope, and mansard roofs have two slopes on all sides with the lower slope being steeper than the upper slope.
How do you take a 250 kawasaki Mojave sprocket off?
first. take the left side rear wheel off. then remove the 4 bolts that hold the sprocket to the sprocket holder. then remove sprocket
What type of simple machine is a bicycle sprocket like?
A sprocket is a lever.
What is a crank gear?
The sprocket on the nose of the crankshaft that drives the cam sprocket.
What is a minimum plain bore sprocket?
A minimum plain bore sprocket is a roller chain sprocket with a hole drilled through the center. A finished bore sprocket is a roller chain sprocket with a hole drilled through the center augmented by either a keyway or set screws.
