0
What else can I help you with?
High side is the suction or discharge?
Discharge side........
Is the suction line the high side?
No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.
Free Twitter backgrounds?
Yes, you can get high quality free twitter backgrounds from:http://www.freetweetgraphics.com
What is vapour binding?
when pressure on the suction side of the pump drop below the vapour pressure of the liquid, vapour forms. It's caused because of insufficient suction head, high suction lift, excessive friction head, or high liquid temperature.
Why do you have high and low sea water suction?
When the ship is at the port, the water is shallow therefore we use high seawater suction. If the low seawater suction was used instead, impurities such as sand would be sucked into the system..
How do you tell the suction line in central air conditioning from the high side line?
The suction line will be the larger line going into the compressor.
Why flat side up reducer is used at pump suction?
To compensate high suction volume during startup of he pump. the reducer area below the pipeline at the suction stores excess volume of fluid.
What happening when you are overcharging an air conditioning with freon?
discharge pressure is high, suction pressure is high superheat is low and subcooling is high.
What does it mean when your suction head is too high and your pump is not pumping water?
suction head is calculated wiht the formula head = 2.31 x psi so if your suction is 30psi then your head is around 60ft. of head. If your suction head is to high then there is not enough water to pump the needed psi for the task
Is suction pressure is high side or low side of refrigeration system?
Low side.
What are the causes of high suction pressure?
Common causes of high suction pressure in a refrigeration system can include a dirty or blocked evaporator coil, low airflow due to a dirty filter or a malfunctioning blower motor, overcharge of refrigerant, or a faulty expansion valve. It could also be due to issues with the compressor such as overheating or mechanical failure.
What is the number one reason why pumps cavitate?
The number one reason why pumps cavitate is due to low pressure at the suction inlet, causing the fluid to vaporize and form bubbles. This can be caused by a variety of factors such as high liquid temperature, air leaks in the suction line, or a blocked or restricted suction line.
