0.40-0.45 Rs/inch
Most common and main limitation of MIG welding is that MIG welder could not weld thicker metal. If you want to know details then visit this site.
can weld aluminium with a mig or tig welder
Tig, mig , or If you are as good as me stick welding will all work
yes
yes
Mig (GMAW) has almost replaced Stick (SMAW) in industry. Small machines can weld thin materials and larger machines weld metals of unlimited thickness. Mig is easy to use and has less waste (no stubs) than stick. Flux core wire produces a slag covering but bare wire w/gas leaves a clean weld.
MiG-29 cost about $11 million.
Aluminum is one example of a metal that cannot be MIG welded and must be TIG welded. The limitation of MIG is usually the heat it can produce versus thickness of the material. One quarter-inch thickness is usually about as thick as you can weld with either MIG or flux-core wire feed welders. Anything else will require the heat energy available with a stick welder.
place the metal clamp on a form of metal turn the mig welder on turn the gas on know were your welding flip your shield down and then give er
Abot 12,000 to 15,000 Euros
mig, oxy-acetelene, arc,
Yes, but, it isn't particularly easy. You should practice on flat stock first.