0
What else can I help you with?
What size welder do you need for 6mm steel?
In order to weld pieces of 6mm steel you can use any type of welder. Depending on how strong and how pretty the weld needs to be will determine the type of welder you choose.
How you chance 10mm steel bar to 8mm steel bar give formula?
Calculate cross sectional area of 10mm bar amd 8mm bar, then divide them and you will get the no. of bars. For Eg. - Area of 10mm bar = 78.53 sq.mm Area of 8mm bar = 50.26 sq.mm No. of 8mm bars in replacement for 10mm bar = 1.562 bars [ theoritical] In practical u'll provide 2-8mm bars.
How much does a plate of 12 4x8 sheet of plate steel weigh?
It depends. How large is the steel plate? How thick is it? This makes things vary. For example: A fat man would weigh more because, he is wider. or thicker A 1/4 thick by 1in wide by 12 in long plate weights 0.85 LB.
What kind of experience do I need to be a welder?
According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.
Where is the the PCV valve on a 2002 v6 firebird?
on top of the manifold under the plate that says"PCV VALVE" you will need to remove two 10mm bolts...
How many lengths of 16mm rough steel in a ton and 10mm rough steel in a ton?
To determine how many lengths of steel can fit in a ton, you need to know the density of the steel and the specific weight of the steel per meter. Generally, rough steel weighs approximately 7850 kg/m³. For 16mm diameter rough steel, a typical weight is about 1.58 kg/m, allowing roughly 634 lengths in a ton. For 10mm diameter rough steel, it weighs about 0.62 kg/m, resulting in approximately 1,607 lengths in a ton.
What is torsion stress?
I need to calculate the stress resulting from a torsion moment on a hollow steel section as well as a flat plate.
How many volts does a wire feed welder need?
A wire feed welder typically requires a voltage of around 220-240 volts for operation. It is important to check the specifications of the specific welder model you are using to ensure it is compatible with the power supply available.
What is the weight of 25mm steel plate?
The weight of a 25mm thick steel plate can vary depending on the density of steel, which is typically around 7.85 grams per cubic centimeter. To calculate the weight, you would need to determine the dimensions (length and width) of the plate. Then, you can multiply the volume (length x width x thickness) by the density to get the weight in grams or convert it to kilograms or pounds as needed.
What is the weight of a steel plate that is 73 x 29 x 5 thick?
To calculate the weight of the steel plate, you need to know the density of steel. The density of steel is around 7.85g/cm³. Convert the dimensions to centimeters (73cm x 29cm x 0.5cm), calculate the volume (V = length x width x height), and then multiply by the density to find the weight (Weight = Volume x Density).
How you can use your 110v arc welder on 220v country?
You will need a 'step up transformer' but it is important to provide the details on the information panel of the welder before ordering
What force is needed to bend 20 mm high tensile steel?
To know the force, you need to know how much you want to bend it; you also need to know the dimensions of the plate and how it is supported.
