answersLogoWhite

0

Shiplap siding originated in the 16th century, primarily used in the construction of ships due to its design that allowed for water drainage and resistance to the elements. It later became popular in residential architecture in the 19th century, particularly in North America, as a cost-effective and efficient building material. Its distinctive overlapping design continues to be favored in modern home design for both aesthetic and functional purposes.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

Can hardie lap siding be installed over wood siding?

No. Tear the old siding off.


Where can you find a mounting bracket or plate to attach outdoor light fixtures flush over lap siding?

You're looking for a lap siding mount:I was able to locate a large variety of mounting plates for lap siding at http://www.antalproducts.com/http://www.sidingsaver.ca/ features a siding bracket that allows you to mount many different things to siding. They don't sell products in the US, but you can order online and they'll ship here.


How does rabbeted siding and lap siding differ?

Rabbeted siding features a notch or groove cut along the edges of the boards, allowing them to interlock and create a tight seal, which can enhance insulation and reduce moisture infiltration. In contrast, lap siding consists of overlapping horizontal boards, with each board partially covering the one below it, which facilitates water runoff and adds visual texture. While both are used for exterior cladding, rabbeted siding offers a more seamless appearance, whereas lap siding is often chosen for its traditional aesthetic and ease of installation.


What is a ship lap joint?

shiplap, shiplap boards, shiplap siding - Wood sheathing whose edges are rabbeted to make an overlapping joint. It is a wood joint used chiefly in exterior siding finishes, it involves rebating the bottom of the horizontal piece of wood as it progressively is stacked on each other. Architecture Student


How do you define the difference between lap siding and dutch lap siding?

I believe the Dutch Lap is the one with the beveled edge at the top of the board, which creates shadow lines. The board lays flat on the vertical. Lap siding has flat boards overlapping each other on an angle. Beaded lap has a rounded, beaded edging detail at the bottom of the board. The boards lay on a slight angle overlapping each other.


What is the formula to figure exterior siding?

lengh times width, plus 10% for waste. If you're talking about lap siding.


What is the MINIMUM lap of rabbeted horizontal lap siding?

17 (calculated via least squares)


What is the going rate for installing vinyl siding?

Depending on location, vinyl siding replacement generally costs $2.50-$3.00 per square foot including material for standard D4-D5 straight-lap siding.


Where can i buy masonite lap siding?

I had a 4x8 panel on my house for 30 years. Great product. I added an addition and tried to find the siding with no luck. Used T-111, 8in on center groove to match my old panel. hard to notice the difference.


What is the weight of wood lap siding?

It depends on the density of the wood used and its thickness, or cross sectional area and the amount of overlap between boards. An average cladding quality softwood is around 24- 32 lbs per cu foot. Assuming approximately 3/4 of an inch thick siding thickness with no overlap this amount of timber would cover a 16 square foot of wall. So it would weigh approximately between 1.5 to 2 lbs per square foot.


Any advantage of dutch lap over traditional lap vinyl siding?

Overall there is little advantage between the two. I would go with the product that looks best for your house. If you use a high quality (40 mill or higher) vinyl siding either will look nice if installed properly. Dutch lap fits tighter at the overlaps due to the extra bend. Often times, traditional lap siding, if "stretched", will cup at the seams, Dutch lap in general is not a prone to this problem as bad. Don't focus this minor problem, just make sure you get a good product and hire a reputable installer and you house will look like new again.


Which president used a lap desk to write important papers?

Thomas Jefferson used a mahogany lap desk to write his first draft of the Constitution.