answersLogoWhite

0

It is called "set" in the teeth. It takes a the sawdust out of the cutting surface so the saw will not bind as much.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What are the parts of an handsaw?

The metal part as a whole is called the sawplate. The part of the sawplate that is furthest from the handle is called the toe. The part that is nearest the handle is called the heel. Some saws have a metal part that is attached to the back of a sawplate to reinforce it. This is simply called the back (hence the name backsaw). Opposite the back is the toothline, made up of teeth. This is the part that does the cutting. The areas in between the teeth are called gullets. The teeth are pushed alternately side -to-side. This determines the kerf of the saw (how wide of a cut line you will make). On saws meant to cut across the grain of the wood (crosscut saws), the teeth are each sharpened with a beveled cutting edge much like a knife. The angle of that bevel is called the fleam.


Which common tooth patterns can be found on crosscut saws?

Teeth on a crosscut saw both cut the wood and release the wood between them. Saws have two rows of cutting edges, and release wood fibers on each side of the kerf. Tooth patterns for saws include Plain (Peg Tooth), M Tooth, Great American, Champion, Perforated-Lance, and Lance Tooth.


WHY IS One side broken AND THE other side bent?

its a joke


Which teeth are your premolars?

The teeth after your canines are your premolars, 4 on the upper and lower, they are side by side.


How do you solution infection in side back teeth?

How do you solution infection in side bach teeth


What are the parts on a tenon saw?

A Trade Qualfied Carpenter or your local hardware store should be able to answer that A tenon saw is a mid-sized back saw that consists of a wide, somewhat rigid blade, a handle (grip), and a cap along the upper side of the blade to further stiffen it.


How can I effectively perform side bent knee raises to target my oblique muscles?

To effectively perform side bent knee raises to target your oblique muscles, lie on your side with your legs bent and lift your top leg towards the ceiling while keeping your core engaged. Repeat on both sides for a balanced workout.


What do uor front teeth have in common with a zip?

I guess it is because our teeth can move side to side, just like a zip!!


What is a Mortice and Tenon joint?

Mortise and tenon A square hole with a square peg. If you look at a wooden table or chair. The leg has the mortise and the side rails have the tenon. The mortise is a rectangular hole slightly smaller than the width and thickness of the rail. On the rail, it extends past the visible length probably about 1 inch. This varies depending on the construction. This extension is between 1/8 to 1/4 of an inch smaller on each side than the rail. It fits into the mortise. Makes for a very strong joint. Mortise and tenon joints are also used in post and beam homes and timber frame homes. As the most common timber framing joint, the mortise & tenon is versatile and functional. It is used to fasten connectors, posts, collar ties, struts, etc. The tenon can vary in size from 1-1/2" thick by 4" long to 3" thick by 10" long, depending on the load requirements of a particular joint. It is held tight by hardwood pegs.


Do your side teeth get replaced?

Yes


What are the teeth?

Molar teeth are the big teeth placed in the back of the mouth. In decidious teeth (baby teeth), kids have two molar teeth on each side, up and down, right and left, for a total of 8 molar teeth. In adult teeth, people have three molars on each side, up and down, right and left, for a total of 12 molar teeth, which includes 4 wisdom teeth.


What Fracture one side of the shaft is split and the other side is bent?

greenstick fracture