e mail me and i will send you the manual,had the same prob on my 91 klx! tiss a bitch. no charge btw just a big file to down load. gary.hme@tiscali.co.uk
the timing marks are on the back of your cam sprockets.
What do you wanna know about it? how do you set it?
idont know
10.5 degrees before TDC at 1350 rpms !
On a 2003 Ford F-250 with a 6.0L Power Stroke diesel engine, the timing marks are located on the crankshaft damper and the timing cover. The damper typically has a notch or line that aligns with a corresponding mark on the timing cover. For the 5.4L gas engine, the timing marks can be found on the crankshaft pulley and the timing chain cover. Always consult the vehicle’s service manual for precise locations and specifications.
i run 40:1 in mine, i have the same bike
The timing marks for a Bear Tracker 250 cc ATV are typically found on the engine's flywheel and the stator or case. To locate them, remove the timing inspection cover on the left side of the engine. Align the timing mark on the flywheel with the mark on the case to ensure proper timing alignment. Always consult the service manual for specific details related to your model.
What is the spark plug gap on a kawasaki mojave 250
To set the timing on a 1996 KTM 250 SX, first, ensure the engine is at TDC (top dead center) on the compression stroke. Remove the flywheel cover and check the timing marks on the flywheel and the stator. Adjust the stator position by loosening the mounting bolts and rotating it until the marks align correctly. Finally, secure the stator in place and recheck the timing to ensure accuracy.
The kawasaki bayou 250 goes exactly 39MPH. I know from experience as I had a person with a speedometer ride next to me
A 2008 Kawasaki KX 250 can go up to 120 MPH. This is a motorcycle.
What year model is a kawasaki bayou 250 with the serial number number JKALFMA133B516107