0
Yes, a Yamaha YZ125 can be piston sleeved, but it's not a common practice due to the design of the cylinder. Sleeving typically involves inserting a new liner into the existing cylinder, which may not always be feasible or cost-effective for a two-stroke engine like the YZ125. Instead, most riders opt for a complete cylinder replacement or a re-bore to a larger size. If considering sleeving, it's best to consult with a professional engine builder for advice specific to your situation.
What else can I help you with?
What is the top speed for a YZ125?
64 mph and the piston is so weak
Will a 1997 YZ125 cylinder fit a 2002 YZ125?
no.
Will a yz125 head and piston fit on a yz85 motor?
I seriously doubt it. This is something you need to talk to your local Yamaha shop about rather than take someone's word on it here.
Top speed on a yz125?
top speed of a yz125 in mph
Is an 81 yz125 a two stroke?
all yz125's are 2 strokes
What is faster yz85 or yz125?
Obviously yz125 is more faster than yz85.
Can thermosteel be used to repair a pitted cylinder wall?
No. If it minor pitting, honing the cylinder may be enough. If it is deep, it will need to be bored and an oversize piston used or the cylinder can be sleeved.
Does a 94 yz125 cylinder interchang with a 99 yz125 cylinder?
a yz 125 goes 80mph
What is yz125 usually referring to?
YZ125 is referring to a Yamaha motorcycle with a two stroke engine designed for motorcross riding. The Yamaha YZ125 weights 189 pounds dry and 208 pounds wet.
Would Bella Swan from twilight wear a long sleeved blouce or short sleeved blouse?
Long sleeved definatley.
Yamaha yz125 94 you have a problem with the timing there is a good spark you have tried turning the inside stator but isn't getting the spark at the right time you have redone piston mains because?
i have a Yamaha yz125 94 i have a problem with the timing there is a good spark i have tryed turning the inside stator but isn't getting the spark at the right time i have redone piston, mains because it isn't timing up right it is also blowing the seal behind the flywheel and petrol is coming out i have tred a all the electrics of a 99 model to no avail it also kicks back when kicking over help
How do you remove magneto on yz125?
VERYCAREFULLY!!
