answersLogoWhite

0

All you have to do is drill the rivets that you see holding the beauty plate in the ends of the muffler. After you do this the beauty plate will come off and reveal another plate. Then the tricky part. You will see the diameter of the inner baffle, you need to find to hole saws. 1 for the inner tube outside diameter and 1 for the inside diameter of the exhaust to cut out after drilling the inner exhaust one out. Then you can look in and notice the baffle being held in place in three spot wher it is welded to the inside diameter of the pipe. You can use a long saw saw blade or something to cut at it or as I have heard other ppl say they just grabbed it with some vise grips and wiggled and tugged on it till it broke free , either way gives you the same result"NO BAFFLE" You will probably like the sound better than factory but Keep in mind you virago will never sound like a Harley even with a nice set of Aftermarket slip ons. I know I have a XV1000 and have done the baffle removal and aftermarkets. Though they do sound good.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove battery from 1996 Yamaha virago?

To remove the battery from a 1996 Yamaha Virago, first ensure the motorcycle is turned off and is in a stable position. Remove the seat by unscrewing or unfastening it, then locate the battery compartment. Disconnect the negative (-) terminal first to prevent sparks, followed by the positive (+) terminal. Finally, lift the battery out of the compartment, ensuring to handle it carefully.


What is the mpg of a 1996 1100 virago?

40mpg.


What is the spark plug gag for a 1996 Yamaha virago 1100?

.028 - 031 FOR AN 1100 YAMAHA VIRAGO


On your 1996 ford f150 4.9 6cyl can you remove the 2nd catalytic converter?

There are not two catalytic converters. Working towards the muffler from the flange, you have a RESONATOR, a CATALYTIC CONVERTER and finally a MUFFLER.


How do you remove the ignition key cylinder in a 1997 Virago?

i have a 1996 varago..to remove the ignition switch you must remove the head light Lind's and all that is inside will be able to see the screws that holds the switch in


What model is a 1996 Yamaha virago jya1tfn08ta023477?

The 1996 Yamaha Virago JYA1TFN08TA023477 is part of the Virago series, specifically known for its V-twin engine and cruiser styling. It features a 535cc engine, which provides a good balance of power and maneuverability. The Virago is recognized for its classic design and comfortable ride, making it a popular choice among cruiser enthusiasts of that era.


How big is the fuel tank on a 1996 Yamaha virago 1100?

4.4 galons


What is the spark plug gap for 1996 yahama virago 1100?

.030" is what the repair manual says.


Does a muffler from a 01 civic fit a 97 civic ex?

you can make it fit with a few welds, i have a 01 civic and it has a 1996 accords muffler on it


Where is a regulator on a 750 1996 Yamaha Virago?

It is attached to the left hand rear passenger foot peg


How do I replace a battery in a 1996 Yamaha virago 250?

find the old one, take it out and put in a new one.


Where is the catconverter on the exhaust muffler of a 1996 Honda CR-V located?

on the exhaust pipe ;)