Mounting and dismounting a lawn tractor tire can go easy or be a real PIA.
Gather two very large flat screwdrivers, or better yet, a pry bar. Place the tire on the rim at angle so that one side drops over the rim. Place a screwdriver on one side between the tire and rim to stop the tire from coming of as you begin working the tire on with the second tool. Simply use the pry bar and work your way around the tire. The closer you get to completion, the more difficult it will be to pry the tire over the rim. You may need a third pry tool to place between the tire and rim on both sides as you work the tire on. You can also use a hammer to assist, with a tool on opposite sides to hold the tire from coming back off, then use the hammer and hit the bead of the tire to work it on while moving the holding tool forward as you progress.
Hint: Use dish washing liquid to liberally lubricate the tire and rim around the bead. This will dramatically reduce the effort to get the tire on.
Once you have done it a couple times, you will find it to be a pretty simple task...most of the time.
Dynamite
You will have to change the rim too. You will need to change both rear tires or it could damage the transaxle.
It's just a small bicycle tire. Use a screwdriver or similar tool to separate the tire from the rim, remove old tube, insert new tube, add air.
It provides a mount for the tire.
You cannot mount a 15 inch tire on a 15.5 inch rim.
Take a metal pipe a wide one and weld it to the rim of the other tire... center it and then weld the other side to other rim... have hollor solid pipe so u can put on and take off
No, the R15 means that it is a radial tire and the 15 is the rim size. Never try to mount a tire and a rim that are different sizes.
Yes, you can mount 225-60r16 tires on a rim made for 215-65r16 tires.
Of course you can.
To mount a bike tire properly, first deflate the tire completely. Then, place one side of the tire onto the rim, starting at the valve stem. Use tire levers to carefully push the other side of the tire onto the rim, being cautious not to pinch the inner tube. Inflate the tire to the recommended pressure and check that it is seated evenly on the rim before riding.
To mount a bicycle tire, first remove the wheel from the bike. Deflate the tire completely and use tire levers to remove one side of the tire from the rim. Place the new tire onto the rim, starting at the valve stem, and work your way around the rim, making sure the tire is seated properly. Inflate the tire to the recommended pressure and check for any bulges or unevenness. Reinstall the wheel onto the bike and you're ready to ride.
On a machine specifically designed to mount tires on a wheel.