Remove the two Allen bolts located on both the left and right side, deep under the seat in the location of the strap. Grasp the seat firmly and slide it to the rear. It should come off. To install the seat, place it in position then slide forward. Make sure the plastic molded lug on the front underside of the seat slides under the small crossmember on the frame and the two smaller plastic molded lugs under the rear end of the seat slide under the two retainers on the fender. Install the two retaining Allen bolts and tighten securely.
10w40
43bhp @ 6500 revs
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
The tanks for the 1995 to 1999 models of this bike are interchangeable.
3.3 quarts...
One down, four up
Honda radioremoving Honda radio installing sony radio
Its both air and water cooled.
remove the four bolts at the front and the rear
On a 1995 Honda Shadow, the stator is located inside the engine case, behind the left side cover. To access it, you'll need to remove the left side cover and the rotor, as the stator is mounted on the engine's crankcase. It plays a crucial role in generating electrical power for the motorcycle's electrical system. Make sure to follow proper procedures for disassembly and reassembly to avoid damaging components.
I think that it is under the r\h side panel cover
Frame below the engine if I remember correctly. I forget which side.