0
To change the V-belt on a Yamaha 350 Bruin, first, ensure the ATV is on a flat surface and the engine is off. Remove the plastic cover by unscrewing the bolts, then take off the driven clutch assembly to access the V-belt. Replace the old V-belt with a new one, ensuring it's properly seated in the clutches, and reassemble everything by reversing the steps. Finally, check for proper operation before taking the ATV for a ride.
What else can I help you with?
What is the capacity of oil on a Yamaha bruin 350?
its 2.5 quarts.
What is the difference between a Yamaha ATV Bruin YFM 350 A and the Yamaha Bruin YFM 350 BA?
The Yamaha ATV Bruin YFM 350 A is typically equipped with a manual transmission and is designed for more experienced riders who prefer greater control. In contrast, the Yamaha Bruin YFM 350 BA features an automatic transmission, making it more user-friendly for beginners or those who prefer a simpler riding experience. Both models share similar engine specifications and performance characteristics, but their transmission systems cater to different riding preferences.
How do you set timing on Yamaha 350 bruin?
Manual says align with the first T
What is the Bolt pattern on a 06 Yamaha bruin 350?
The 2006 Yamaha Bruin 350 has the same bolt pattern for years 04-06. Front tire size 25x8x12 Rear tire size 25x01x12 Rim size 12x7 Bolt Pattern 4x110
Where is the oil filter on the Yamaha bruin 350?
behind the left front tire tucked inside the frame
Where is the oil plug on a Yamaha 350 bruin?
The oil plug is under the oil filter ...straight bolt ..14 mill..
Where is VIN on Yamaha bruin 350?
left frame rail below engine at front behind lower control arm
How do you change the differential oil and what do you use for a Yamaha 350 bruin ATV?
I have a Yamaha 350 big bear, and differential drain plug is on the bottom of the differential. Just remove the plug and let it drain, put the plug back in and fill it back up... i use just regular gear oil
How do you change a stator on a 350 bruin yamaha?
To change the stator on a Yamaha 350 Bruin, first disconnect the battery and remove any necessary body panels for access. Then, remove the flywheel by loosening the flywheel nut and using a puller to take it off. Next, unbolt the stator from its mounting position, disconnect the wiring harness, and replace it with the new stator. Finally, reassemble everything in reverse order, ensuring all connections are secure before reconnecting the battery.
I cleaned my carburetor for my Yamaha bruin 350 now when you give the gas it stalls.It will idle. what did I do wrong?
If the carburetor is cleaned on the Yamaha Bruin 350 and it will idle but stall when given gas, it could be that the float is sticking. The carburetor may also need to be adjusted by turning the adjustment screw so that it is not getting too much gas when revved.
How do you change oil in Yamaha 2004 350 bruin?
you will need to pull the drain plug, then take off the oil filter, then replace the oil plug and the new filter, finally put your new oil in.
Where is the battery on a Yamaha Bruin 350?
The battery on a Yamaha Bruin 350 is typically located under the seat or behind the side panel on the right side of the vehicle. To access it, you'll usually need to remove the seat or the panel, which is secured by bolts or clips. Always consult the owner's manual for specific instructions and safety precautions when handling the battery.
