It has a belt driven automatic transmission. Similar to a snowmobile.
To set the clutch on a Polaris snowmobile make sure you have cleaned the entire clutch assembly and adjust all the bolts to the proper setting. With both of those things done make sure you have properly lubed and set the belt to the right tension.
HIGHER PERFORMANCE REPLACEMENT FOR POLARIS 3211080 DRIVE BELT.
The belt on a Polaris snowmobile should be inspected regularly and replaced as needed, typically every 1,000 to 2,000 miles, depending on riding conditions and usage. It's crucial to check for signs of wear, such as fraying or cracking, and to follow the manufacturer's recommendations in the owner's manual. Regular maintenance can help ensure optimal performance and prevent potential damage to the snowmobile.
To adjust the belt on a Polaris 500, first ensure the vehicle is on a level surface and the engine is off. Remove the clutch cover to access the primary and secondary clutches. Check the belt's wear and alignment; if necessary, replace it. Adjust the clutch sheaves to the specified gap using feeler gauges, then reassemble the cover and make sure everything is securely fastened before testing the vehicle.
To adjust the transmission belt on a 2001 Polaris Scrambler 500 4x4, first, ensure the vehicle is on a flat surface and the engine is off. Remove the clutch cover by unscrewing the retaining screws, then check the belt's wear and tension. If the belt is worn, replace it; otherwise, adjust the belt by loosening the clutch mounting bolts and repositioning the clutch for proper tension. Finally, reattach the clutch cover and ensure everything is secure before testing the vehicle.
No you can not. If belt is loose, are won't fit then you have the wrong belt. The belt tensioner is spring loaded and that is what tightens the belt.
Automatic tensioner-no provision for adjustment.
how do I tighten the belt on a polaris sportsman 450
There is an adjuster on the power steering pump. One cannot adjust it as it has an automatic tensioner if the belt is squeaking it is time to replace belt/tensioner or both
To adjust the AC belt tension on a 1991 Dodge Stealth, first, locate the tensioner pulley. Loosen the tensioner bolt and use a wrench to rotate the tensioner, which will relieve tension on the belt. Adjust the tension by moving the tensioner until the belt is snug, then tighten the tensioner bolt securely. Finally, check the belt for proper alignment and tension before starting the engine.
it could be that you have a broken or weak clutch spring or you may have dirty clutches or you could have just a worn out belt or any combo of the 3