Only adjustment on it is the fuel mixture screw (on the bottom of carb) all the other jets are fixed, and the only way to modify is to buy new jets and install them.
i need wiring diagram for a Honda 300ex
I have a 1998 honda 300ex that needs the timing set how do i do that
twist the screw under the carb
there is a screw on the carb. be sure to adjust while the engine is running so you can tell by the idle when it is set properly.
Yes
It should be on the carb!
The Honda 300ex was first introduced in 1993. This is a very popular ATV model due to its reliable parts as well as affordable prices. The 300ex model was discontinued after 2008.
20x10x9
about 55-60
The bore size of a Honda 300ex is 74 mm. The bore size refers to the diameter of the cylinder in which the piston moves up and down. In the case of the Honda 300ex, the bore size is an important specification that affects the engine's performance and power output.
The horse power of a 300ex is right around 17 to 18 hp!!!!! The horse power of a 300ex is right around 17 to 18 hp!!!!!
If you are not able to adjust it down with the idle adjust knob you may have an airleak at the carb.