take out links
The chain on a 2000 Polaris Trail Boss 325 is removed by loosening the retaining bolts and applying tension away from the sprockets. The chain can them be slipped off the sprockets and removed.
My 98 polaris trail boss does about 55-60mph
No, it isn't. The Polaris Trail Boss 350 is a liquid cooled 2-stroke.
I have a 1993 Polaris 250 Trail Boss. It won't start. It floods out the carb. Could it be low compression?
1990 vin location for a trail boss 4wd
I can get to 70-80 MPH
No, you don't mix oil into the gas of a Polaris Trail Boss 350 4-stroke. It is a 4-stroke engine, and you do notmix oil with the gas.
The location of the fuel filter on a Polaris 330 Trail Boss is in the fuel line that connects to the fuel pump. The fuel pump is located on the driver's side of the motor.
The Polaris 250 Trail Boss and 325 Trail Boss are different models, and while they may share some components, many parts are not interchangeable due to differences in engine size, design, and specifications. It's essential to consult a parts manual or a dealer for specific compatibility. Always verify part numbers before making a purchase to ensure proper fitment.
1.9 quarts
I need this information for regestering my ATV
To adjust the idle on a Polaris 250 Trail Boss, locate the idle adjustment screw on the carburetor, typically near the throttle linkage. Start the engine and allow it to warm up, then use a screwdriver to turn the idle screw clockwise to increase the idle speed or counterclockwise to decrease it. Aim for a steady idle around 1,200 to 1,500 RPM. Be sure to check the owner's manual for specific idle specifications and procedures for your model.