There is no brake cable on your bike
In the center arm rest is a cover at the bottom that can be removed to expose the emergency brake cable, and a nut to adjust the tension.
Remove the cover from around the brake handle by removing the two screw in the lower front and the two bolts inside the center console. Remove the top locking nut from the cable and then turn the other nut clockwise to adjust the brake.
How do you adjust an F-250 shifter cable? 2000 model
How do you adjust the kickdown cable on a Honda Civic 2000 ex
you can start by removing the tires and the rotors. then look on the lower half of the e brake ring. there should be a circular locking key. turn it clockwise. or look under your driver door and there is the brake cable they can be adjusted by turning the cable nut clockwise a few times.
Pull the lever of your parking brake up a few clicks. Look inside, under the lever and you will see a length of threaded metal cable with a nut attatched. Use a deep 10mm socket and tighten cable to desired taughtness.
First make sure rear service brakes are adjusted properly Parking brake adjustment should either be at the junction of the three cable under vehicle or at the parking brake handle (May have to remove trim to access)
How do you change the front and rear brake pads on a 2000 Honda Civic Si?
The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
Yes, cable can be adjusted . Somewhere in the main brake cable there is a square frame adjuster you change with 2 wrenches.
You can not adjust the shift cable if you have having problems to where your exploer will not go into park then you will need to buy a new shift cable that is the only way to fix the problem
How to Install Front Brake Pads Check Related links below.