"Wow, your Harley looks amazing! The attention to detail and the custom touches really stand out. It must be a blast to ride!"
they switch on their electric blanket on fall blast!
its a move just switch out moves
In the Diamond Mine, you can use the explosives (behind the elevator) to blast the rock and the rock wall. Turn off the sparking switch, push a barrel over, then turn on the switch. You'll need one blast for the rock and one for the wall.
You have to turn off the sparking switch. When you have the explosives where you need them, turn the switch back on. First you have to blast the rock, then the wall.To use the explosives:Turn off the sparking wire from the elevator switch.Slide a barrel of explosives over to the right, and put it next to the rock.Turn the switch back on, sparking the explosive, which explodes the rock.Turn the sparking wire off, and repeat the process to blast the wall.
I would suspect you fan switch is not the problem but it is possible. Normally this is caused by a defective blower motor resistor pack. Inspect that before replacing the fan switch.
Dodge his 3 attacks and he will pause for you to attack him. When he uses Djinn Blast, switch out your character.
Turn off the sparking switch by pressing it. Then push a barrel over to the rock and turn the switch back on. This will set off the explosive and clear the rock. Then turn off the switch again and push another barrel over so you can blast the rock wall.
Blast the switch with some wd40 and push it in and out a bunch of times, this usually works on fords when the light wont come on but its worth a shot. If no luck you will have to replace the switch.
In the Diamond Mine, there are explosives behind the elevator (to the left), and you can use them to blast the rock and wall. Turn off the sparking wire before you try to move them. Then turn the switch back on to set them off. Blast the rock, then the wall.
You have to edge behind them to slide them to the right. First you have to blast the rock, then the wall. The sparking switch will set the explosives off.To use the explosives:Turn off the sparking wire from the elevator switch.Slide a barrel of explosives over to the right, and put it next to the rock.Turn the switch back on, sparking the explosive, which explodes the rock.Turn the sparking wire off, and repeat the process to blast the wall.
In the Diamond Mine, the explosives to blast the rock wall are to the left of the elevator. (There are as many as you need.) Turn off the elevator switch (the sparking wire) and slide a barrel to the rock, then explode it by turning the switch back on. Repeat for the wall.