answersLogoWhite

0

remove the cover on the front sprocket. Loosen the locking bolt. then sqwueeze your clutch lever in and push the lead stop out of the handle. and out of the bike. its really that simple putting the new one in same steps just tighten the nut until you feel resistance and reduce 1/4 turn and fine adjustments can be made on the lever mount.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you adjust clutch cable on 1300 suzuki?

the hayabusa does not have a clutch cable. the clutch is hydraulic just like the b


How do you Change clutch cable on 92 Suzuki Sidekick?

To change the clutch cable on a 1992 Suzuki Sidekick, first, ensure the vehicle is parked on a level surface and the engine is off. Begin by disconnecting the negative battery terminal for safety. Remove the old clutch cable by detaching it from the clutch pedal and the transmission, then install the new cable in reverse order, ensuring proper routing and adjustment. Finally, reconnect the battery and test the clutch operation before driving.


Where is the clutch fluid reservoir on a Suzuki Samurai?

they have a cable clutch not hydraulic


Where does the clutch fluid go in 95 suzuki sidekick?

Suzuki Sidekick has a cable for the clutch. No fluid required. If it hard to push or seems to 'stick' then replace the cable.


How do you change clutch cable on 2009 Chevrolet Cobalt?

how do you change clutch cable on cobalt


Can you use a choke cable from a suzuki katana 700 on a suzuki katana 600 year 2001?

While the Suzuki Katana 700 and 600 may share some similarities, compatibility of parts like the choke cable can vary by model and year. It's essential to check the part numbers for the choke cables of both models to determine if they are the same. If the part numbers match, it should fit; otherwise, it's best to use the specific choke cable designed for the 2001 Katana 600. Always consult a service manual or a professional for accurate guidance.


How do you change the clutch cable on 1994 GMC sierra?

There is no clutch cable its hydrolic.


How do you install clutch cable on a 95 Suzuki sidekick jx 16 valve?

To install the clutch cable on a 1995 Suzuki Sidekick JX 16 valve, start by disconnecting the old cable from the clutch pedal and the transmission. Route the new cable through the firewall and secure it to the clutch pedal assembly. Next, attach the cable to the clutch release lever on the transmission, ensuring it is properly adjusted for tension. Finally, check the clutch operation to ensure it engages and disengages smoothly.


How do you change a clutch cable on a 1998 integra?

You don't. There is not a clutch cable on a 1998 integra. It has a hydraulic clutch.


How do you change the clutch cable on an 1985 mr2 na?

You have a hydraulic clutch in your mr2, no cable.


How do you change a clutch cable for a Renault Megane R reg?

clutch cable replace


How do you change a clutch cable on a Daewoo nexia?

Daewoo nexia is with hidrolic sistem for clutch. There is no cable