If you are dismantling the forks completely, it will take 12 fl. oz. of fork oil. If not, 11 fl. oz.
For a 2000 Harley Fat Boy, you typically need about 13.5 ounces (approximately 400 ml) of fork oil for each fork leg. It's essential to check the owner's manual for specific recommendations regarding oil type and viscosity, as these can impact performance and handling. Always ensure to properly compress the forks when measuring the oil to get an accurate level.
2004 fatboy oil change
3.2 liters
a 1995 Fat Boy uses 3 quarts of motor oil, 1 quart of primary chaincase oil and 24 ounces of transmission oil.
125mm from the top edge of the fork without the spring and with the fork collapsed. Also the weight of the rider can change the oil height along with the riding style.
cbr400 nc29, oil change level, 3.2litres, with an oil filter change its 3.4litres.
750mls
To change the fork oil in a 650 V-Star, first, elevate the front of the motorcycle and remove the front wheel. Then, remove the fork caps and drain the old oil by loosening the drain screws at the bottom of the forks. After the oil has drained, replace the drain screws, refill the forks with new oil to the manufacturer’s specified level, and reassemble the fork caps. Finally, check the fork action and ensure everything is securely tightened before lowering the bike.
588ml dry or ca 500ml oil change
A type of primary oil that can b used for a Harley Fat Boy is Lucus Primary specific oil & Lucus 85/140. This can be purchased at auto repair shops.
To change the fork oil on a 1999 Softail Classic, start by safely lifting the front of the bike and removing the front wheel. Then, detach the fork tubes from the triple tree, and drain the old oil by removing the fork caps and allowing the oil to flow out. Once drained, refill each fork tube with the recommended amount of new fork oil, reassemble the forks, and ensure all components are securely tightened before reinstalling the front wheel. Finally, check for any leaks and test the suspension before riding.