0
What else can I help you with?
How do you change the fork seals on a 96 Virago 250?
Remove wheel, fender. Remove Allen bolt at bottom of fork with impact wrench, it usually will not come loose, if you are trying it by hand unless you stick the special tool down into the top of fork tubes. (I use a broom handle), remove dust seals on fork legs, remove circlip, carefully remove oil seals, replace them, and reverse procedure for reassembly, add oil to fork tubes. Bubba
How do you change the crankcase seals on a 1996 rm 250?
It depends which seal has gone; left or right.
How much fork oil in a 2004 kx 250?
330ml per fork
What holds the clutch fork on a 1976 Ford F-250?
A part called a clutch fork pivot holds the clutch fork on a 1976 Ford F-250. Another part near the clutch fork is the clutch flywheel.
What is this fork oil capacity for hornet 250?
400ml
How much fork oil does a 05 yzf 250 hold?
6 oz of oil per fork
How much fork oil do you need to use on a 2001 honda cr 250?
For a 2001 Honda CR 250, you typically need about 10.6 to 11.0 ounces (approximately 315 to 325 ml) of fork oil per leg, depending on the specific setup and whether you're adjusting for your weight or riding style. It's important to check the service manual for the exact specifications and recommended oil type. Always ensure to replace the fork seals and properly bleed the forks after changing the oil for optimal performance.
Fork oil spec for 1993 kdx 250?
Sae 5w
How do you change the oil in the front forks on a yz 250 1989?
Loosen all bolts and remove wheels and brakes. Remove forks and the caps. Drain the old oil. Clean the fork well. Pour fresh oil into the front fork and pump it.
What is the standard weight fork oil on a 1993 rm 250?
5 wt.
How much fork oil for a 2001 SUZUKI RM 250?
buy a manual
What is the fork oil capacity on a 1999 kawasaki kx 250?
110mm standard
