To change the Transmission Fluid in a 2006 Harley Sportster 1200, first ensure the bike is on a level surface and warm the engine slightly. Remove the transmission fluid drain plug located at the bottom of the transmission and let the old fluid drain completely. Replace the drain plug and refill the transmission with fresh fluid through the fill plug on the side, using the recommended type of transmission fluid. Finally, check the fluid level to ensure it's at the correct height and secure the fill plug.
You can use any SAE certified transmission fluid in your 1987 Harley-Davidson Sportster motorcycle. The manufacturer recommends that you never overfill the transmission fluid.
through the clutch inspection cover. The Primary and transmission share fluid.
Harley Sport-Trans Fluid if you can find it. I use it in mine religiously. Works great!
through the clutch inspection cover
1 quart of oil should do the trick
Your 1976 sportster holds one quart of fluid. I use HD Sportlube or HD PRI ANDTRANS LUBE, but in the olden days I used a 20 wt non detergent motor oil. This fluid lubes the clutches and transmission gears and primary chain.
have a 1976 CC FLH harley davidson need to whats the transmission fluid weight
You should only use Harley transmission fluid from the dealership. It's engineered by Harley for their transmissions.
5000
Use Harley trans Fluid or Harley Formula +
under the back of the primary. either feel around or look under the primary and you will see it. Sportsters use the same fluid for the trans and primary.
The 2005 Harley-Davidson Road King typically requires about 3 quarts of transmission fluid when performing a transmission fluid change. It's important to use the recommended type of fluid, which is usually Harley-Davidson's own transmission fluid or an equivalent. Always check the owner's manual or service manual for the most accurate information and specific procedures.