There isn't a definitive way. I would suggest to remove the intake valve adjuster cap ( the one on the top, near the carb/intake ) start the engine and you should see oil pumping around the valve spring. However, if the engine runs I would not expect you have an oil pump problem as the engine would seize very quickly.
quart and a half
The 1985 Honda ATC 125M typically requires about 1.4 quarts (or approximately 1.3 liters) of oil when performing an oil change. It's important to check the owner's manual for specific recommendations and to ensure the correct oil type is used. Always check the dipstick to confirm the appropriate oil level after filling.
Check eBay.
Heat use an oxy acetylene torch. Heat it up and pound off with a hammer and pry bar.
I don't know exactly, but I went to Shucks and they looked it up. My ATC is on another property or I would check for you.
It should
what are the horsepower rating on a1983 Honda 250r atc
Check out my bio page for help on setting your timing.
It has an oil screen which you have to take the right side engine cover off to get at. It's a pain in the neck.
No, it will not. 81-84 are the same
185s yes
Eng oil capacity 1985 Honda 200 m atc?