The 1985 Honda ATC 125M typically requires about 1.4 quarts (or approximately 1.3 liters) of oil when performing an oil change. It's important to check the owner's manual for specific recommendations and to ensure the correct oil type is used. Always check the dipstick to confirm the appropriate oil level after filling.
quart and a half
10w-40 and it take 650ml of it
It has an oil screen which you have to take the right side engine cover off to get at. It's a pain in the neck.
How much fluid in the front forks of a 1985 atc 250r take. I am changing the fork seals
1.3 quarts
no just gas
Eng oil capacity 1985 Honda 200 m atc?
.8 of a liter .8 of a US quart.
There isn't a definitive way. I would suggest to remove the intake valve adjuster cap ( the one on the top, near the carb/intake ) start the engine and you should see oil pumping around the valve spring. However, if the engine runs I would not expect you have an oil pump problem as the engine would seize very quickly.
10W-40 is what the Honda dealership told me
10w 40
i own a 200m it is NOT MIX!! the oil dipstick is on the right side of the motor and its grey. use 30w