answersLogoWhite

0

To access the spark plugs on a Suzuki Boulevard C90T motorcycle, first, make sure the engine is cool. Remove the seat and the side covers to expose the engine. Then, disconnect the ignition coils by unscrewing the bolts holding them in place, and carefully pull them out to access the spark plugs. Use a spark plug socket and ratchet to unscrew and remove the plugs for inspection or replacement.

User Avatar

AnswerBot

3d ago

What else can I help you with?

Related Questions

What type of oil does a 2005 Suzuki Boulevard C90T use?

Suzuki 4- stroke motorcycle engine oil Sp-4A SAE 10W - 40


How do you drain fuel from a suzuki boulevard c90t?

To drain fuel from a Suzuki Boulevard C90T, first, ensure the motorcycle is on a level surface and the engine is cool. Locate the fuel petcock (fuel valve) and turn it to the "Off" position. Then, disconnect the fuel line from the carburetor or fuel injector and place a container underneath to catch the fuel. Allow the fuel to drain completely, and be sure to follow proper safety precautions to prevent spills and hazards.


Where is the fuce box in a suzuki boulevard c90t?

for the 2006 suzuki c90t......fuses are located below seat.....if looking at bike from behind, on right side, the 1st chrome cover, it has 2 hex nuts. 30 amp fuses are under false gas tank on left side at front.


Need help with my motorcycle?

ok


How do you change oil in Suzuki c90?

On my 2006 C90T, here's what I do: 1. Stand the bike up straight, and make sure it can't fall over. 2. Put a pan under it. 3. Pull the drain plug. 4. Remove the cover from the RH side of the engine. 5. Remove the oil fill plug. 6. Let the oil drain out. 7. Remove the oil filter. 8. Clean the spilled oil off of the frame. 9. Replace the oil filter. 10. Remove the pan with the old oil in it. 11. Replace the oil plug, using a new washer. 12. Add oil, until it shows half way on the sight glass. 13. Start the engine, let it idle about 5 minutes. 14. Recheck the oil level, and add some if needed. 15. Replace the engine side cover. 16. Remove the bike stand. 17. Dispose of the used oil properly. 18. Go ride.