not a clue
To install the piston and rings on a 1999 Polaris XC 600, first ensure the engine is disassembled, and clean all components. Lubricate the piston and rings lightly with oil, then place the rings onto the piston, ensuring they are properly aligned and seated in their grooves. Insert the piston into the cylinder, aligning it with the connecting rod. Finally, gently tap the piston down and secure it in place with the wrist pin and clips.
If you are mechanically inclined it is cheaper to replace the entire engine
White smoke from the exhaust is caused by coolant leaking into the combustion chamber. You either have a cracked head or you did not install the gasket properly.
There should be a arrow on top of the piston close to the pistons edge. Your top ring's gap should be on same side as arrow. Then alternate next ring 180 degrees from last gap. The arrow should facing forward when installed into the jug.
Defective spark plug, plug wire, burnt valve, busted piston, bad rings, blown head gasket or cracked head.Defective spark plug, plug wire, burnt valve, busted piston, bad rings, blown head gasket or cracked head.
sounds to me like ur rings are shot you gotta replace them and wet sand your piston/cylinder should fire up
1999 SUZUKI RM125
need diagram for wheel assembly 1999 suzuki vitara
There are many different reasons. The first one is bad piston rings and the second one is bad valve gaskets (it might have a little bit different name).
Either your valve stem seals are gone - valve guides or worst case senario piston rings gone - all expensive to fix.
Most often the case of blue smoke coming out of the exhaust is the cause of piston rings going bad. The rough engine idle is also the cause of poor seals and piston rings.
it should