To install a tether on a PW80, first, locate the tether switch and the mounting point on the bike. Attach the tether cord securely to the switch and then mount the other end to the rider’s gear, such as a belt or wrist. Ensure the tether is not too tight to allow for free movement but short enough to activate the switch if the rider falls off. Finally, double-check the connection for security before riding.
u can do 40 with a pw80
how to set Yamaha pw80 carburetor
yes they are all the same
Yes, but it must be rooted, and you need to install the "wireless tether" program from the Android Market.
well a pw80 goes 74kph and a kx65 goes 110kph
Is it illegal to tether a horse
The spark plug gap for all years/models of Yamaha PW80 and BW80 is 0.024" and NGK part number is BP6HS. NGK plugs come "pregapped" but it's always a good idea to double check before you install any plug, old or new.
Anthony Tether was born in 1942.
Call you local Ford dealer first. Ford, at least here in Canada, will pay for the installation of one tether in all Fords built after 1990. Ask them about it first.
It all depends on condition, if its a nice clean pw80 about 800-1200. hope this helped
All Yamaha PW80 s have 3 semi automatic gears ( no clutch lever etc )
What is the correct meani of the word tether