0
There are no pick up tubes in a riding mower fuel tank. The fuel is gravity fed until it gets to the fuel pump. Then its mechaniclly pumped to the carburator. There is ony one fuel line from the gas fuel tank to the fuel pump. And all u have to do is measure the hose. Go buy the same length hose put it on the nozel of the fuel tank. Tighten the clamp. Then connect the other end of the hose to the nozzel on the fuel pump. Pay attention of how you take it off so u cn install the new one the right way.
What else can I help you with?
Where can i find an owner's manual for my scotts 1742 riding mower?
http://www.deere.com/en_US/scotts/serv_operators_manuals.html
How do you replace belt on a scotts riding lawnmower?
To replace the belt on a Scotts riding lawnmower, first, ensure the mower is turned off and disconnected from the power source. Remove the mower deck by loosening the mounting bolts and disconnecting any associated linkages. Once the deck is off, locate the old belt, remove it from the pulleys, and install the new belt by routing it around the pulleys according to the mower's diagram. Finally, reassemble the mower deck and secure it back in place.
Wiring diagram for a scotts 42 riding mower?
Have you done a Google search? You should be able to locate it.
How do you install a belt on a L1742 Scott's lawn tractor?
what is the belt diagram for a scotts lawn mower s1742
How do you change the clutch spring on a Murray riding lawn mower?
how to install a spring clutch on a murray mower
How to install brakes on a riding lawn mower?
well all you gotta do is get some gum and sick it to the lawn mower!
Riding mower timing?
Can I do it myself, set the timing on my riding mower.
how to install main drive belt on Murray riding mower?
To install the main drive belt on a Murray riding mower, first ensure the mower is turned off and the key is removed for safety. Remove the mower deck by disconnecting the belt and any necessary bolts. Next, route the new drive belt around the engine pulley and axle pulley, following the mower's belt routing diagram, which is usually found on the mower's frame. Finally, reattach the deck and check the tension on the belt before starting the mower.
How do you install deflector shield on dlt 3000 riding mower?
To install a deflector shield on a DLT 3000 riding mower, first, ensure the mower is turned off and the key is removed for safety. Locate the deflector shield and align it with the designated mounting points on the mower deck. Use the provided bolts or screws to secure the shield in place, ensuring it is firmly attached. Finally, double-check that the shield operates correctly before using the mower.
How do you install pto cable on troy built riding mower 2010?
To install the PTO (Power Take-Off) cable on a 2010 Troy-Bilt riding mower, first, ensure the mower is turned off and the battery is disconnected for safety. Remove the old cable by detaching it from the PTO switch and the mower deck. Install the new cable by connecting it to the PTO switch and securing it to the mower deck, making sure it is properly routed and has enough slack for operation. Finally, reconnect the battery and test the PTO functionality to ensure it operates correctly.
What is the smallest John Deere riding mower?
john deere smallest riding lawn mower
Where to find a dash for a Scotts 50570x8 mower?
To find a dash for a Scotts 50570x8 mower, you can check online retailers like Amazon or eBay, where parts are often available. Additionally, visit the official Scotts website or contact their customer service for replacement parts. Local hardware stores or garden equipment dealers may also carry mower parts. Finally, consider checking with specialty lawn mower repair shops for assistance.
