answersLogoWhite

0

To install the main drive belt on a Murray riding mower, first ensure the mower is turned off and the key is removed for safety. Remove the mower deck by disconnecting the belt and any necessary bolts. Next, route the new drive belt around the engine pulley and axle pulley, following the mower's belt routing diagram, which is usually found on the mower's frame. Finally, reattach the deck and check the tension on the belt before starting the mower.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you change the clutch spring on a Murray riding lawn mower?

how to install a spring clutch on a murray mower


How do you install belt to mowing deck on 42 cut Murray 15.5 riding lawnmower?

I have Murray 42" cut riding mower that the belt came off. How do I put the belt back on?


The installation diagram for a murray 12.5hp 38inch cut riding lawn mower?

To install a Murray 12.5hp 38-inch cut riding lawn mower, first ensure the mower is on a flat surface and the engine is off. Attach the mower deck by aligning it with the mounting brackets on the chassis and securing it with bolts. Connect the drive belt according to the diagram, ensuring proper routing around pulleys. Finally, check all connections and adjust the mower height as needed before starting the engine.


What size belt goes on a Murray Riding Lawn Mower - 12.5 HP 40 Cut Lawnmower?

what size belt do i need with a murray riding lawn mower that is a 12.5hp. 40"


How do you install drive belt on scag riding mower?

To install the drive belt on a Scag riding mower, first, ensure the mower is turned off and the key is removed. Remove the deck by disengaging the belt and any necessary pins or brackets. Then, route the new drive belt around the pulleys according to the diagram in the owner's manual, making sure it sits properly in the grooves. Finally, reassemble the deck and check the belt tension before testing the mower.


Where can you find a manual for a 1984 42 Murray riding mower?

A Murray riding lawnmower owners manual can be obtained from most Murray riding lawnmower dealerships. You can find the owners manual at most local libraries.


How do you fit drive belt on Murray ride on mower?

We will need some more details... Is it the drive belt or the belt for the blades?it is the drive belt for Murray lawn mower model 38618x92a


What kind of oil do you use in Murray riding lawn mower?

30W for summer


What is the spark plug gap on a Murray 12 hp riding lawn mower?

The spark plug gap for a Murray 12 hp riding lawn mower should be set at .020 inches. This is equal to .5 mm.


Where can you find a diagram showing how to install a belt on a Murray 12.5 HP 38 riding lawn mower?

You can find a diagram for installing a belt on a Murray 12.5 HP 38 riding lawn mower in the owner's manual that comes with the mower. If the manual is unavailable, you can often find it online on the manufacturer's website or through lawn mower repair forums. Additionally, video tutorials on platforms like YouTube may provide visual guidance for the installation process.


Does a Murray riding lawn mower model 42614A 14HP 42cut have an adjustment for the drive belt?

Yes, the Murray riding lawn mower model 42614A typically has an adjustment mechanism for the drive belt. This adjustment can usually be made by loosening the belt tension or adjusting the idler pulley to ensure proper tension and performance. Always refer to the owner's manual for specific instructions and maintenance recommendations for your model.


Does a 46 inch Murray riding lawn mower need two belts?

Yes, a 46-inch Murray riding lawn mower typically uses two belts. One belt is for the engine to the deck drive, while the other is for the deck to the blades. It's important to consult the owner's manual for specific details on the belts required for your model.