answersLogoWhite

0

ok what you do is first of all the bike might be to heavy but we will try any way. first the part of the engine that spins the thingy that cuts the weeds. you need to connect the part that spins to one bike gear. so basicly instead of pedling the motar turn the gears that turn the chain that spins the wheal of your bike. was that any help it was my first answer josh

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you take the engine off a weed wacker and put it on a scooter?

Well imply remove the engine from the straight shaft. Be sure the engine has a centrifigual clutch. Once the engine ha been removed you can pick up a fairly expensive($100) friction drive kit from the online which the engine will bolt right up to.


Can you put a 110cc pocket bike engine in a 50cc super pocket bike without mods?

Yes you can put on a 110cc bike engine on a 50cc bike and if there is any modification work then just take it to a local bike repair shop.


How do you put an engine on a bike?

To put an engine on a bike, you need to first choose a compatible engine and bike frame. Then, you will need to mount the engine onto the frame securely, connect the necessary components such as the fuel tank and exhaust system, and ensure that everything is properly aligned and functioning before testing the bike.


What oil do you put in 4 cycle weed wacker?

4 cycle oil also known as 4 stroke oil. Reason: 4 cycle oil is not meant to be mixed with gasoline as the weedwacker has 2 separate lines for fuel and lubricant. Conversely 2 cycle weed wackers require 2 cycle engine oil to be mixed at a ratio of 40:1 with the gasoline.


How could you put a dirt bike engine on a go-kart?

in wonder the same thing like could i buy a 125cc engine from a dirt bike and put it in a mini sprint


Were do you put gear oil on 125 pit bike?

in the engine


How do you put a mini bike engine on a bike?

To put a mini bike engine on a bike, first, ensure you have the right tools and mounting hardware. Remove the bike's original pedals and crankset, and then securely mount the mini bike engine to the frame using engine mounting brackets. Connect the engine's throttle and wiring to the bike's controls, ensuring it's safely positioned for balance and stability. Finally, check all connections and test the setup to ensure everything functions properly before riding.


Can you put any any engine in a bike?

You probably could if you had the right equipment to put it on!!


Should you drain the fuel in the lawn mower tank if is blowing blue smoke and refill with new fuel?

assuming you have a four stroke engine, is it possible that premix gas from a weed wacker was put in by accident. if not usually if the fuel was bad it wouldn't run right, blue smoke is usually caused by engine oil getting into cylinder, could be a simple as a severely clogged air filter or could need engine work


How to install a 13 hp engine into your mini bike?

it is just like hooking up a 6hp engine in a mini bike all you need is a bigger space to put the engine in.


How can you make your quad bike go faster?

put a bigger engine in it!


Can you put a bigger engine inside of a crf80f Honda dirt bike?

Yes you can do this and it will increase the speed and power of the bike.