you remove the spark arrestor by taking the little screws that are at the end of the tip then yank it out with pliers
the ground-wire
SPARK PLUG (DR8ES) (NGK) SPARK PLUG (X24ESR-U) (DENSO)
The spark plug on a Honda Rancher 350 four-wheeler is located on the side of the engine, beneath the seat and fuel tank. To access it, you typically need to remove the seat and possibly the side panels for better visibility and reach. The spark plug is screwed into the cylinder head, and you can identify it by the thick ignition wire connected to it. Always ensure the engine is cool before attempting to change or inspect the spark plug.
NGK Makes Really Good Spart Plugs.
NGK CR8EH-9 Projected Resistor Type Spark Plug Have fun :-)
burn it
Takes the same size as a 185. DR8ES-L
Remove old spark plugs. Insert new spark plugs..... Simples
remove the spark plug wires one at a time and unscrew the plugs
Check the plug No. Last number is for the Gap size. NGK Resistor Spark Plug DPR7EA-9 The 9 is the gap size
No, Using a resistor spark plug with resistor wires can create too much resistance for the ignition system.
It should be at 0.O25 on standard spark plugs and O.O35 on resistor on resistor spark plugs.