The spark plug on a Honda Rancher 350 four-wheeler is located on the side of the engine, beneath the seat and fuel tank. To access it, you typically need to remove the seat and possibly the side panels for better visibility and reach. The spark plug is screwed into the cylinder head, and you can identify it by the thick ignition wire connected to it. Always ensure the engine is cool before attempting to change or inspect the spark plug.
The spark plug on a 2011 Honda Rancher TRX 420 is located on the right side of the engine, near the front. To access it, you may need to remove the plastic cover on the right side of the frame. The spark plug is threaded into the cylinder head and can be removed with a spark plug socket.
.07
the ground-wire
0.8 to 0.9 mm
SPARK PLUG (DR8ES) (NGK) SPARK PLUG (X24ESR-U) (DENSO)
Would you use lawn mower plugs in your car?? NO!!!!
0.039-0.043 in (1.00 - 1.10 mm)
To remove the spark arrestor on a 2008 Honda Rancher ES, first ensure the ATV is turned off and cooled down. Locate the exhaust system and remove the screws or bolts securing the spark arrestor cover. Carefully pull out the spark arrestor from the muffler, taking care not to damage any components. After removal, reattach the cover securely.
NGK Makes Really Good Spart Plugs.
No spark to the spark plug on a Honda Rancher can be caused by several factors, including a faulty ignition coil, a bad spark plug, or issues with the wiring or connections in the ignition system. Additionally, problems with the ignition switch or the kill switch could prevent the spark from being generated. It's also worth checking the battery and fuses, as low voltage can affect spark production. Performing a thorough inspection of these components can help identify and resolve the issue.
burn it
if it starts i might need the carburetor tuned or cleaned or check the spark plug gap