0.8 to 0.9 mm
.07
The spark plug on a Honda Rancher 350 four-wheeler is located on the side of the engine, beneath the seat and fuel tank. To access it, you typically need to remove the seat and possibly the side panels for better visibility and reach. The spark plug is screwed into the cylinder head, and you can identify it by the thick ignition wire connected to it. Always ensure the engine is cool before attempting to change or inspect the spark plug.
The spark plug gap setting for a 2004 Honda Rancher 350 is typically between 0.028 and 0.031 inches (0.7 to 0.8 mm). It's important to check the owner's manual for specific recommendations, as gaps can vary slightly based on engine modifications or specific conditions. Always ensure the spark plug is properly torqued when installing it to maintain optimal engine performance.
The spark plug gap for a 2002 Honda Rancher 350 is typically between 0.028 to 0.031 inches (0.7 to 0.8 mm). It's important to measure and adjust the gap to ensure optimal engine performance and ignition efficiency. Always refer to the owner's manual or service guide for the most accurate specifications.
The spark plug gap for this kind of ATV is .035.
will a 300 honda motor fit a 350 honda rancher
No, a Honda Rancher 350 carburetor will not work on a Honda Rancher 400. The difference in the sizes of the 350 and 400 carburetors are not compatible with each other.
2003 honda rancher vaccume diagram
not 100% shure but since 2007 is a 420 and 2002 is 350 and the 350 has a carb and 420 fuel injected but if so i might do it to my 06 rancher
how do i check the timing on my 02 honda 350 atv
the engine oil and trans oil is all in one!
20,6