Remove the dashboard cover. Remove the retaining ring, from the speedometer. Remove the speedometer cable from the back of the speedometer. Reverse the process to install the new speedometer.
Remove the dash panel cover. Remove the speedometer retaining ring. Remove the cable from the back of the speedometer. Reverse the process to install the new speedometer.
HOW DO YOU REMOVE AND INSTALL A SPEEDOMETER SENSOR IN A 2001 FOR ESCORT ZX2,AUTO.
Remove speedometer head to unscrew and remove cable Remove cable from transmission Re-Install new cable using same routing as original
The most common reason for a speedometer to fail is a broken speedometer cable. Loosen the nuts on each end of the speedometer cable. Remove the speedometer cable retaining clips. Reverse the process to install the new speedometer cable.
Remove the seat. Remove the battery. Replace the battery. Replace the seat.
how do you remove front tire on 02 softail springer
pull the dash apart. behind the speedometer you will see the cable. it connects to the transmission.
Remove speedometer head Disconnect old cable Follow original routing for new cable Disconnect fitting at side of transmission and remove cable - replace with new
how do you remove the back wheel on a 2005 Harley Davidson Dyna low rider FXDL
To install a speedometer cable on a 2000 Hyundai Elantra, first, ensure the vehicle is securely lifted and supported. Remove the instrument cluster by unscrewing it and disconnecting the wiring harness. Locate the speedometer cable at the back of the cluster, disconnect it, and then install the new cable by inserting it into the speedometer and securing it. Finally, reconnect the wiring harness, reinstall the instrument cluster, and test the speedometer for proper function.
To install the speedometer cable on a 1971 VW Super Beetle, first, remove the speedometer from the dashboard by unscrewing the retaining nuts. Next, insert one end of the speedometer cable into the speedometer and secure it in place. Then, route the other end of the cable through the tunnel and connect it to the speedometer drive on the transaxle. Finally, reattach the speedometer to the dashboard and ensure the cable is properly secured and free of any obstructions.