Unplug the front fender tip light (if applicable on your Road King model) and loosen the nuts on the four allenhead screws that hold the fender to the fork sliders.
Carefully remove the four screws while supporting the fender, then lift the fender up and out from between the fork sliders.
To prevent scratches you might want to tape rags to the bottom of the fender, which is the widest part.
Front fenders for Harley Davidsons, as well as other parts, can be bought directly from Harley Davidson dealers or from from Harley Davidson's website. You can also find them on major online retailers like Amazon or eBay.
To remove the seat on a Harley Davidson Road King, you must unscrew the Philips head screw that is directly behind the seat. Then, slide the seat and unfasten the hook at the front of it.
Down the back of the queen seat there is a single screw into the fender. You might have to open the topbox for better access. Remove the screw, lift the rear of the seat ad slide backwards and upwards to release the front clip.
On my 06 I just removed the two nuts & bolts on each side & slid it out.
Harley front end components and accessories can be purchased from online websites such as harley-davidson and phatperformanceparts. They both sell many different components and parts for Harley-davidson bikes.
Harley part number 65913-06B refers to a chrome front fender for various Harley-Davidson models, designed to enhance both aesthetics and protection. Part number 66080-06B is a chrome rear fender, also intended for specific models, providing a matching look and improved durability. Both parts are commonly used in customization and restoration projects for Harley-Davidson motorcycles.
Usually under the seat against the back fender. Sometimes down behind the battery on a plate in front of the back wheel.
The Harley Davidson Springer is a softail motorcycle that has a springer front end. The springer has an extra spring loaded shaft that helps for the front wheel's suspension.
it has 3 auto-reset breakers behind the battery on the front of the rear fender where the starter relay is, no fuses unless you have heated grips, vest etc.
stamped on the front down tube.
1928
how do i remove the front fender to 1996 Oldsmobile cutlas supreme.