remove clutch plates etc. the large bolt around the pushrod is reverse threaded with a locking tab washer, bend the tabs flat, using an impact wrench to remove the large bolt is best. the whole unit will slide right off
To replace the clutch on a 1997 Harley Davidson Fat Boy, first, remove the primary cover by loosening the bolts and taking off the derby cover. Next, drain the primary fluid and remove the clutch actuator rod. Then, take out the clutch spring and pressure plate to access the clutch discs. Replace the worn discs and reassemble the components in reverse order, ensuring proper torque specifications and fluid levels.
To replace the starter clutch on a 2010 Harley-Davidson Street Glide, first, remove the primary cover by draining the primary fluid and disconnecting the necessary components. Then, remove the clutch assembly and the starter gear to access the starter clutch. Replace the faulty starter clutch with a new one, ensuring proper alignment, and reassemble the components in reverse order. Finally, refill the primary fluid and check for proper operation.
In my harley devidson its immobilizer lock could you told me how to unlock
how do you remove the back wheel on a 2005 Harley Davidson Dyna low rider FXDL
remove the seat
To change the clutch cable on a Harley Davidson Ultra Classic, first, disconnect the negative battery terminal for safety. Then, remove the clutch cable from the clutch lever by loosening the adjustment screw and pulling the cable out. Next, detach the cable from the transmission side by removing the retaining clip or bolt. Finally, install the new cable by reversing the process, ensuring proper adjustments for tension and free play before reconnecting the battery.
Remove the Seat.
To remove the seat on a Harley Davidson Road King, you must unscrew the Philips head screw that is directly behind the seat. Then, slide the seat and unfasten the hook at the front of it.
how do i replace the bendix drive in my 85 harley fxrs
Remove the starter. the solenoid is mounted on the starter.
To do this, you must have the manual.
What year, what model, what size? The question is extremely vague, i have to say!