To remove the heat shield on the exhaust pipe of a 2003 Yamaha V-Star, first, locate the screws or bolts securing the heat shield in place. Typically, these will be a combination of Allen or Phillips screws. Use the appropriate tools to carefully unscrew them, taking care not to damage the shield or the exhaust pipe. Once all fasteners are removed, gently slide the heat shield off the exhaust pipe.
The Yamaha VStar 250 has about 21 horsepower. The Honda Rebel has about 17.
Heres a UTUBE on it http://www.youtube.com/watch?v=bQ7nyMRnBIM
93 mph on my 2002 v star Yamaha custom
Floats on Yamaha 660 how you fix
under the gas tank
check the carberauter
remove bolt on the back of passenger seat, pull that back and out. Then driver seat just pulls back and out as well.
The blue color is an example of the color used on a rectifier on a 2000 Yamaha Vstar 1100 classic.
To remove the carburetor from a Yamaha Vstar 1100, first ensure the motorcycle is off and cool. Disconnect the fuel lines and electrical connections linked to the carburetor, then remove the air intake assembly. Unscrew the bolts securing the carburetor to the engine and carefully lift it out, taking care not to damage any gaskets or seals. Be sure to note the order of disassembly for reinstallation.
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
yes
2.5 seconds