answersLogoWhite

0

From a Honda mechanic: To take off the rear wheel the exhaust must be removed. So first you will want to look at where the head pipe meets up with the cylinder head. There are two 10mm socket nuts that need to be removed. then you will notice the larger bolts that bolt the muffler to the bike, those come off as well. With the exhaust removed. the large axle nut on the rear wheel needs removed, and the wheel will slide off the splined axle. Be sure this axle is lubed with grease when reinstalled, this will ensure good spline health. and then just reinstall all in reverse order.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you remove the rear tire on a Honda metropolitan with pictures?

To remove the rear tire on a Honda Metropolitan, first, ensure the scooter is on a stable surface and secure it with a center stand. Next, remove the rear wheel nut using a socket wrench and then detach the brake caliper by unscrewing its bolts. Once the caliper is out of the way, slide the wheel off the axle. For detailed steps with pictures, refer to a service manual or online tutorial specific to the Honda Metropolitan model.


How do you remove spare tire from Honda Passport?

To remove the spare tire from a Honda Passport, first, locate the spare tire tool kit, usually found in the rear cargo area. Use the provided wrench to lower the spare tire by inserting it into the access hole in the rear under the vehicle. Turn the wrench counterclockwise until the tire is lowered completely to the ground. Once lowered, remove the tire from the carrier by detaching the retaining bolt or strap.


Where is the tire jack in a 2002 Honda CR-V?

In the rear luggage area, remove the carpet, - remove the folding table - it is stored underneath.


Where is tire jack in 1998 Honda CR-V?

In the rear luggage area, remove the carpet, - remove the folding table - it is stored underneath.


What are the tire pressures for honda shadow 750?

The Honda Shadow Spirit, recommends 29 psi in the front tire and 32-36 psi in the rear tire.


How do you get the tire of a 1992 Honda Prelude?

I'm not sure what you mean here...are you wondering what tire size is on a 1992 Honda Prelude? Or, how do you get to the spare tire? Or, how do you remove a tire?


What is the recommended tire pressure for a Honda Shadow 600?

29 psi front tire, 38 psi rear tire.


What is the correct tire pressure for a Honda shadow?

28 psi for the front and 36 for the rear tire.


How do you release the spare tire on a 2004 Honda Pilot?

To release the spare tire on a 2004 Honda Pilot, first locate the spare tire tool kit, which is typically found in the rear storage area. Use the provided wrench to lower the spare tire by inserting it into the winch mechanism located under the rear of the vehicle. Turn the wrench counterclockwise until the tire is fully lowered to the ground. Once it's lowered, you can remove the spare tire from the carrier.


What is the tire pressure for Honda jazz?

front 32 rear 31


How do you change a rear tire on a Yamaha XS1100?

with the motorcycle on the ground install tire change tool from tool kit across the tabs on the frame then put motorcycle on center stand. Remove rear fender bolts to raise rear fender, remove axle bolt then remove rear tire.


How to remove the front strut on a Honda accord without removing the tire?

You must remove the wheel/tire in order to remove the front strut.