answersLogoWhite

0

What else can I help you with?

Related Questions

How do you replace parts in a loose and sloppy steering in a 1984 Chevy truck?

Most of the time it is the bushing in the top of the column. .Pull the steering wheel off,pull the locking plate for the steering wheel,pull the blinker assembly,then you will come to a stiff spring that preloads the bushing under it.....That bushing,and spring need to be replaced,and you have cured your problem. . . . .


How can I repair my steering column from being loose on my 1984 Honda fourtrax?

Alway ensure steering are always tighten up


What is the function of the bolt on the bushing on the control arm?

To mount the control arm, which needs a bushing to be isolated from the frame so that frame vibrations are not transmitted to the steering column.


How do you remove and replace a steering column in a 95 Cadillac Sedan Deville?

How to remove and replace a steering column on a 95 Cadillac Sedan Deville?


Instructions to replace steering column assembly 1995 Monte Carlo?

when do you know when you have a bad steering column


How do you replace steering column on 1986 Pontiac parisienne?

how to change steering column on 86 pontiac bonneville


How would you tighten a loose steering column on an Olds Delta 88?

You have to replace the entire steering column. It is not loose, the lock is broken on your column height adjuster.


Can you replace any 89 caprice steering column with another 89 steering column?

A Caprice steering column can be replaced by another as long as it matches. It if comes from another Caprice of that year, it will fit properly.


How do you replace the steering column for a 74 nova?

you simply GET A MECHANIC!!


How do you Replace the steering column on a Infiniti i30?

To replace the steering column on an Infiniti i30, start by disconnecting the negative battery terminal to ensure safety. Remove the steering wheel, airbag (if equipped), and any trim panels surrounding the column. Unbolt the steering column from the dashboard and the lower steering shaft, then carefully pull it out. Install the new column by reversing the disassembly steps, ensuring all connections are secure before reconnecting the battery.


What would cause your steering column on a G20 van to become loose?

There are 4 bolts at the bottom of the steering column that tend to get loose after entering and exiting your vehicle. Pulling your self up on the steering wheel puts stress the steering column and causes it to become loose. If you do not correct the problem fast by tightening the bolts you will have to replace the entire steering column.. -Henry's locksmith and steering column repair


Steering column replace 1989 Plymouth sundance?

To replace the steering column in a 1989 Plymouth Sundance, first, disconnect the negative battery cable to ensure safety. Remove the steering wheel, then detach the plastic cover around the column, followed by the ignition switch and any electrical connections. Unbolt the steering column from its mounting points and carefully pull it out. Install the new column by reversing the steps, ensuring all connections are secure and the steering wheel is aligned properly.