Get the Clock displayed by pressing the button on the back of the speedo. Once there, press and hold the button until the clock display starts to flash. First it will ask if you want 12 hour time or 24 hour time. Quickly press the button to change between them. Press and HOLD for the choice to be saved. It will continue like this for the hour selection and the minute selection. Once you press and HOLD for the minute selection, you will be back at the normal display modes where clicking the button selects the clock, odometer, Trip A and Trip B.
That's it!
A Harley Davidson clock is available to purchase from online retailers such as Amazon, Retroplanet and eBay, and from high street retailers such as Bed, Bath and Beyond.
Yes you can at many sites online.
As soon as you turn on the ignition, make sure that the radio is off. Turn the ignition switch back off until the display goes off and turn it back on, then just push the hrs or min button to set the time.
I took mine off the bike and into the jewelry shop, they had no problem helping me out. good luck Formotion the company that makes the clocks has a web site to order a kit that includes the tools battery and o-rings for$24.95 plus shipping. I tried jewerly shops and not a one could get the back off. I called harley in Milwakie and they directed me to formotion.
For 2008: Turn Key To Accessories If necessary, push button on console until you see the click. Press and hold console button for 5 seconds. 1st option is for 12hr/24hr clock. Click once to choose between then. Press and hold button for 5 seconds, clock will return with hour blinking. Click button to the desired hour. Press and hold button for 5 seconds, minutes will blink. Click button to the desired minutes. Press and hold button for 5 seconds to save.
To set clock on newer models.....turn ign on or to access..stereo must be off......press soft key 6 to setup menu..... use up mode on right handlebar below turn signal switch...to increase hours thenuse min soft keyy to adjust minutes release when done
There are two screws on either side of the lens cover remove them and remove the lens cover.Grasp the bulb and push gentle down now turn the opposite direction a clock would turn about 1/8 inchNow lift up and there you have it.Now open the package your new bulb is in and and reverse the process.
Depends on the year. If the bike has the key switch under the seat (right hand side) install the key and turn the switch clock wise to the on position. Make sure the kill switch is set to run. Pull the enricher knob out (the round knob on the left side of the bike under the fuel tank.) Press the start button until it starts.
One may look to a custom furniture design store to purchase a grandfather clock. Other stores such as Bed, Bath and Beyond, Big Lots, Walmarts and Sears all also should be looked into when purchasing a grandfather clock.
http://www.craftstylish.com/item/13602/how-to-make-a-custom-clock/page/all It will tell you all of the instructions and what you need for it.you just wave to make it orange. Hope this helped :)
it is in large park near forester prep school
If you like to build custom robots, a bracket clock is specifically used as the timer for the central processing unit of the machine. It helps to keep the robot in perfect synchronization with all of its parts.